Sansui HDLCD2600A Owner's Manual page 14

Connections to other equipment
To connect the LCD TV to a DTV receiver/set-top box
If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a
component video cord.
Left side of the LCD TV
/
,v V, Op4
COMPONENt, 1
To AV2 AUDIO (L/R) IN To Audio OUT
1_) Audiocord(notsupplied)(_
_ C0mp0nentvide0c0rd(n0tsupplied) PB_
PR
TO COMPONENT IN
To Component OUT
0000
To connect the LCD TV to an HDMI or a DVI device
The HDMI input receives digital audio and uncompressed video from an HDMI device or uncompressed digital
video from a DVI device.
When you connect to a DVI device with an HDMI-to-DVI adapter cable, it transfers only the video signal.
Separate analog audio cords are required.
Left side of the LCD TV
•, Dll
W]'
PC
UONrrOR I
PC/_-I_ @" 11
NOTE:
To HDMI-2 (or1) IN
To HDMI-1 IN
I
To HDMI out
HDMI cable (type A connector)
I
(not supplied) I
or
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
To PC/HDMI-1 AUDIO IN
Audio cord (not supplied)
To DVI output
HDMI device
DVI device
• If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable
or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To
receive the picture you must change the output resolution on the external component.
Should you require further instruction, please contact the manufacturer of the external component.
• When you connect a DVI device, you must connect only with HDMI-1.
14