Selecting The Hdmi Audio Input Source; Turning Off The Built-In Speakers; Adjusting The Back Lighting; Setting The Auto Shut Off - Sansui HDLCD3700D Owner's Manual

26
Selecting the HDMI
audio input source
When you use PC/HDMI AUDIO IN jacks with
HDMI or DVI device, you must select HDMI audio
input source from "HDMI" or "DVI',
Press MENU.The menu screen will appear.
Press • or • to select"Audio", then press • or
ENTER.
Press • or • to select"HDMI1 Audio".
Press < or _,-to select "HDMr' or "DVI".
HDMI: When you connect the HDMI device to
the TV, select this setting.
DVh When you connect the DVI device to the
TV with analog audio cords, select
this setting.
Press EXIT to return to the normal screen.
Turning off the built-in
speakers
Use this feature to turn the TV speakers off when
you connect an audio system (see pages 16).
Press MENU.The menu screen will appear.
Press • or • to select"Audio", then press • or
ENTER.
Press • or • to select"Speakers".
Press < or _,-to select "Off".
Press EXIT to return to the normal screen.
To turn on the built-in speakers:
Select "On" in step 3 above.
Adjusting the back
lighting
The Backlight feature adjusts the screen
brightness for improved picture clarity.
Press MENU.The menu screen will appear.
• or • "Setup", press • or
Press to select then
ENTER.
Press • or • to select"Backlight".
Press < or • to adjust the setting.
Press EXIT to return to the normal screen.
Setting the Auto Shut Off
If the Auto Shut Off feature is On, a station being
viewed stops broadcasting and the TV is not
operated, the TV will automatically shut itself off
after 15 minutes.
Press MENU.The menu screen will appear.
Press • or • to select"Setup", then press • or
ENTER.
Press • or • to select"Auto Shut Off".
Press • or • to select "On" or "Off".
Press EXIT to return to the normal screen.
Resetting your settings
The Reset function returns your settings to the
factory settings.
press • or • "Setup",
Press MENU. Then to select
then press _,-or ENTER.
Press • or • to select"Reset".
Press • or ENTER to return your settings to the
factory settings.
appear on screen approx.
"Reset" will the 3
seconds, then it returns to the normal screen.
NOTE:
• You also can reset the settings by pressing RESET
when "Picture" and "Audio" menu is displayed.