Sansui HDLCD3700D Owner's Manual page 16

37" wide tft lcd television with digital tuner
Hide thumbs Also See for HDLCD3700D:
Table of Contents

Advertisement

Connections
to other equipment
To connect
an audio
system
This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the
TV's remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers (see "Turning
off the built-in
speakers"
on page 26).
NOTE:
Rear of the TV
r
VA.AUOlOl
Amplifier
i
,
[]
BBBB_
I
ooo
Q ooo
To Audio (L) Input 4(_To
Audio (R)
/
Audio cord (not supplied)
Input
To hear sound when using an external
audio amplifier,
the volume of both theTV
and the amplifier
must be set
above 0 (zero).
For example,
if the volume
of the TV is set to 0, you will not be able to hear any sound, even if the volume
of the
amplifier
is at its highest
level.
To connect the LCD TV to a PC (Personal
Computer)
Before you connect
this LCD TV to your PC, change
the adjustment
of your PC's Resolution
and Refresh rate
(60Hz).
Connect
one end of a (male to male) VGA cable to the video card of the computer
and the other end to the VGA
connector
PC MONITOR
on the back of the LCD TV. Attach the connectors
firmly with the screws on the plug. In
case of a Multimedia
computer,
connect
the audio cord to the audio output of your Multimedia
computer
and to
the AUDIO connector
of the PC/HDMI
AUDIO IN jack of the LCD TV.
Press INPUT SELECT
on the remote control to select
PC mode.
Switch
on the computer.The
LCDTV
can operate as the computer
monitor.
Rear of the LCD TV
__
11
TO PC MONITOR
IN
HDMI 1
[] _i@l;_r'J]
HDMI 2
To PC/
HDMI
AUDIO
IN jack
PC
111
VGA cable (not supplied)
Audio cord (not supplied)
Monitor
Display
modes
MODE
Resolution
Refresh rate
VGA
640x480
60Hz
VGA
720x400
70Hz
SVGA
800x600
60Hz
XGA
1024x768
60Hz
WXGA
1280x768
60Hz
WXGA
1280x720
60Hz
WXGA
1360x768
60Hz
To return to normal mode
Press INPUT SELECT again.
NOTE:
• The on-screen
displays
will have a different
appearance
in PC mode than in TV mode.
• If there is no video signal from the PC when the unit is in PC mode, "No signal" will appear
on the TV-screen.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents