Choosing
aDigital Sound Format (Dolby orPCM)
Both analog
and digital
sounds can bo output from tho roar-panol
connoctors
on your Sot-
lop Box, Iho digital
sound outputs are optical
and coaxial
connectors
labolod
"Dolby
Digital
Output,"
After connocLing
an optical
or a coaxial
digital-audio
component,
you
must spocify the transmission
format
(Dolby or PCM, as appropriato
to your componon0,
1
Use the Menu Up/Down
bultons to
highlight the Setup icon and press
EN IEI;L
Press the MENU button on the remote control.
Use the Menu Up/Down
bultons to
highlight he Sound Output icon and
press EN IEI._
Use the Menu Up/Down
bultonsto
choose the appropriate format
(Dolby or PCM)and press EN IEI._
PressEXII.
NOTE
In Analog mode, only PCM is supported.
4.6