4
4
CHAPTER FOUR
Special Features
Choosing a Digital Sound Format (AC3 or PCM)
Both audio and digital sound are available from the rear-panel connectors of the Set-Top
Box. The digital audio output is an optical connector labeled "Dolby Digital Output."
After connecting the optical digital-audio component, you must specify the transmission for-
mat (PCM or AC-3, as appropriate to your particular equipment).
4.4
Press the MENU button on the remote control.
1
Push the I-Point control up or
2
down to highlight the "Setup"
icon and press ENTER.
Push the I-Point control up or
down to highlight "Sound
Options" and press ENTER.
Push the I-Point control up or
4
down to highlight "Dolby Digital
Output".
Repeatedly press ENTER until the appropriate format appears
5
(PCM or AC3).
Press EXIT.
6