Information Codes - Samsung WF405ATPAWR/AA-0001 User Manual

Front-loading washing machine
Table of Contents

Advertisement

Available languages

Available languages

troLAbe hoot ng
INFORMATION
CODES
The washer
may display information
codes to help you better understand
what
is occurring
with your
washer.
Redistribute
the load, press the Start/
Pause button.
Unbalanced
load prevented
your
washer from spinning.
Door is open when washer
is running.
dS
Your washer
failed to lock the door.
L
I=L
¸
Close the door tightly and restart the cycle.
If the code reappears,
call for service.
Close the door tightly and restart the
cycle.
If the code reappears,
call for service.
This error code appears
when the
Call for service.
heater is 96 °C or above.
Call for service.
Your washer
has tried to fill, but has not
reached
the proper water level.
ILE(11L=}
Leak problem
or Waterlevel
Sensor has
an abnormal
reading.
The door will not unlock.
Your washer
is not draining.
It can also mean that the unit senses a
small clog while draining.
i__ IL _i _i!_!_!_!_!_!_!_!_
Your washer
has tried to fill but was
unsuccesdul.
Check if the hot water supply hose is
connected.
i__ IL _i _i!_!_!_!_!_!_!_!_
Call for service.
Make sure the door is firmly closed.
Press the Power button
to turn offyour
washer, then turn it on again. If the
code reappears,
call for service.
Clean the drain filter. Then, clean the
debris filter (See page 29).
If you are in the middle of a wash you
can try this first:
t.
Turn off the unit for 10 seconds
and
then turn it on again.
2.
Select the Spin Only cycle (See page
22).
3.
Press the Start/Pause
to drain the
water.
If it still does not drain, call for service.
Make sure the water faucets are open all
the way. Check for kinked hoses.
Check the inlet screens on the fill hoses.
If you use a Flood Safety Device, then
please remove the device and connect
the water hoses directly to the unit.
You must connect
the hot water supply
hose because
hot water is supplied
by
the Auto Temperature
Control
(A.T.C.)
function
if the temperature
of the cold
water is lower than 59°R
34 troubleshooting
WF405ATPA-03145A-01
EN.indd
34
2012-03-08
_fl4:39:16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wf405atpa series

Table of Contents