Wireless Network Setup - Samsung Series6 650 PN50A650 User Manual

Wireless Network Setup
> The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 91)
Auto Setup
If you connect the LAN cable and it supports DHCP, the lnternet Protocol (IP)
Settings are automatically configured.
The wireless IP sharer to be connected to this product must support DHCP.
1 Press the MENU button to display the menu.
Press the =, or T button to select Setup, then press the ENTER button.
2 Press the A or T button to select Wireless Network Setup_ then press the ENTER
button.
3
4
Press the ENTER button to select Internet Protocol Setup.
Press the _, or _' button to select Auto Setup, then press the ENTER button.
The tnternet Protocol is set automatically.
Select Access Point Select to check the network connectivity.
(Refer to page 95)
Press the EXIT button to exit.
Manual Setup
1 Press the MENU button to display the menu.
Press the _, or T button to select Setup, then press the ENTER button.
2 Press the _, or T button to select Wireless Network Setup, then press the ENTER
button.
3 Press the ENTER button to select Internet Protocot Setup.
4 Press the A or T button to select Manual Setup, then press the ENTER button.
Press the A, T, 4 or _. button to move to an item, and press the numeric button to
configure the selected item. Press the ENTER button.
If you want to use a static IP address, refer to the user manual of your wireless IP
sharer.
Select Access Point Select to check the network connectivity.
(Refer to page 95)
Press the EXIT button to exit.
I BN68 01532A Engindb 94 2008 04 18 2_ 8:39109