S-VIDEO VIDEO Use these buttons in the DMA, WISELINK and Anynet+ modes. : This remote can be used to control recording on Samsung recorders with the Anynet+ feature) ON/OFF Press to backlight the buttons on the remote. This function is convenient for using at night or when the room is dark.
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via HDMI Connecting to HDMI (High Definition Multimedia Interface) DVD Player or Cable Box / Satellite receiver (Set-Top Box) HDMI Cable (Not supplied) hat is HDMI? • HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video signals using a single cable.
Connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box) via Component cables Connecting to Y, P DVD Player or Cable Box/ Satellite receiver (Set-Top Box) Audio Cable (Not supplied) Component Cable (Not supplied) ➢ Component video separates the video into Y (Luminance (brightness), P to match the component video and audio connections.
Connecting a VCR Video Connection VCR Rear Panel Audio Cable (Not supplied) S-Video Cable (Not supplied) Antenna Cable (Not supplied) ➢ If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV.
Connecting a Digital Audio System Digital Audio System Optical Cable (Not supplied) ➢ 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH. ➢ Each Digital Audio System has a different back panel configuration. ➢ When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver.
Connecting a PC Using the D-Sub Cable PC Audio Cable (Not supplied) D-Sub Cable (Not supplied) Using the HDMI/DVI Cable 3.5 mm Stereo plug to RCA Cable (Not supplied) HDMI/DVI Cable (Not supplied) ➢ Each PC has a different back panel configuration. ➢...
Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. ➢ It may take a while for the picture to appear. Viewing the Displays and Menus Viewing the Display ...
When selecting the Cable TV system: Press the ENTER button to start the auto program. Press the ◄ or ► to select the correct analog signal cable system source among STD, HRC, and IRC, then press the ENTER button. If you have Digital cable TV, select the cable system signal source for both Analog and Digital.
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. Press the MENU button to display the menu. Press the ▲...
Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Poor picture quality. Poor sound quality. No picture or sound.
Page 12
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Country Customer Care Center CANADA 1-800-SAMSUNG (7267864) U.S.A 1-800-SAMSUNG (7267864) Web Site Samsung Electronics Canada Inc., Customer Service...
Page 13
Samsung Electronics America, Inc. 105 Challenger Road Ridgefield Park (New Jersey) 07660-0511 Samsung Electronics Canada Inc., Customer Service 55 Standish Court Mississauga (Ontario) L5R 4B2 Centre d’appel – heures de service (du lundi au dimanche, de 9 h à 12 h (HNE)) www.samsung.com/global/register.
(Voir la page DMA (Digital Media Adapter) Utiliser cette fonction lorsqu’un appareil Samsung DMA est branché à une interface HDMI ou lorsque le téléviseur est en mode DMA. Pour plus de renseignements sur les procédures d’utilisation, se reporter au...
Branchementd’unlecteurDVDoud'uncâblosélecteurou récepteur (décodeur) à l’aide d’un câble HDMI Raccordement aux prises HDMI (High Definition Multimedia Interface) Lecteur DVD ou câblosélecteur/ Récepteur (décodeur) Câble HDMI (non fourni) Qu’est-ce que la HDMI? • La HDMI est une interface multimédia à haute définition qui permet la transmission de signaux numériques audio et vidéo à l’aide d’ un seul câble.
Branchementd’unlecteurDVD,câblosélecteurourécepteur(décodeur)àl’ aide de câbles de composant BranchementàY,PB,PR Lecteur DVD ou câblosélecteur/ Récepteur (décodeur) CâbleAudio (non fourni) Câble de composant(non fourni) ➢ Le composant vidéo sépare le vidéo en Y (luminance (luminosité)), PB (bleu) et PR (rouge) pour une qualité d'image supérieure. S'assurer que les branchements audio et vidéo correspondent.
Branchementd’unmagnétoscope BranchementVidéo Panneau arrière du téléviseur Panneau arrière du magnétoscope Câble audio (non fourni) Câble vidéo (non fourni) Câble d’antenne (non fourni) ➢ Si le magnétoscope est un modèle “mono” (non stéréo), relier les prises d’entrée audio droite et gauche du téléviseur au moyen d’un connecteur en Y (non fourni).
Branchementd’unsystèmeaudionumérique Système audionumérique Câble optique (non fourni) ➢ La diffusion audio en 5.1 canaux est possible lorsque le téléviseur est raccordé à un appareil externe doté de cette fonction audio. ➢ La configuration du panneau arrière de chaque système audionumérique est différente. ➢...
Branchementd’unordinateur À l’aide du câble D-Sub CâbleAudio (non fourni) Câble D-Sub (non fourni) À l’aide du câble HDMI/DVI Câble stéréo/2RCA de 3,5 mm (non fourni) Câble HDMI/DVI (non fourni) ➢ La configuration du panneau arrière de chaque ordinateur est différente. ➢...
Mise sous tension/hors tension du téléviseur Appuyer sur la touche POWER de la télécommande. Il est aussi possible d’utiliser la touche POWER du téléviseur. ➢ Le téléviseur peut prendre un certain temps avant de s'allumer. Affichage des paramètres et menus Affichage des paramètres ...
Page 21
Aumomentdelasélectiondusystèmede télévision par câble : Appuyer sur ENTER pour amorcer la programmation automatique. Appuyer sur les touches ◄ ou ► pour choisir la source du signal analogique appropriée STD, HRC, ou IRC, puis sur ENTER. Si le câble est numérique, sélectionner la source de signal pour une diffusion analogique et numérique.
Pour choisir la source Sélectionner le téléviseur ou une autre source d’entrée externe branchée au téléviseur, comme un lecteur DVD, câblosélecteur ou récepteur. Sélectionner pour choisir la source d'entrée désirée. Appuyer sur la touche MENU pour afficher le menu. Appuyer sur la touche ▲...
Dépannage Le tableau ci-dessous dresse la liste des problèmes courants et suggère des solutions. Si aucun de ces conseils ne permet de corriger le problème, communiquer avec le centre de service Samsung le plus près. Problème Image de mauvaise qualité.
Page 24
Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Comment contacter Samsung dans le monde Si vous avez des suggestions ou des questions concernant les produits Samsung, veuillez contacter le Service Consommateurs Samsung.