Table of Contents
Advertisement
Available languages
Available languages
Configuring
the Lnput Menu
[_
Source
List
Use to select TV or ether external inputsources such as DVD / Blu=rayplayers / Cable Box /
Satellite receivers (Set=TopBox) connected to the TV. Use to select the input source of your
choice.
Press the SOURC_ button on the remote control to view an external signal source.
TV lAY / Component / PC / HDMI/DVl
{_
You can choose only those external devices that are connected to the TV. In the Source
List, connected inputs will be highlighted and sorted to the top. Inputs that are not
connected will be sorted to the bottom.
{_
PC Always stay activated.
{_
TOOLS (Tools): Displays the _dit Name and Information menus.
Edit Name
Name the device connected to the input jacks to make your input source selection easier.
,
VCR / DVD / Cable ST8 / Satellite 8TB / PVR 8T8 / AV Receiver / Game / Camcorder / PC / DVm PC / DVm / TV / LPTV/ 81u-ray
/ ND DVD / DMA
When connecting an HDMI/DVt cable to the HDMI (DV0 LNport, you should set the NDMI/DW mode to DW or DVI PC in the
_dit Name of the hput mode. In this case, a separate sound connection is required.
Configuring
the Support
Menu
_3
Self Diagnosis
Picture Test
If you think you have a picture problem, perform the picture test. Check the color pattern on the
screen to see if the problem still exists.
® Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.
There may be a problem with the TV. Contact Samsung's call center for assistance.
,_ No: If the test pattern is properly displayed, select No. There may be a problem with your
external equipment. Please check your connections. If the problem still persists, refer to the
external device's user manual.
,
Sound Test
If you think you have a sound problem, please perform the sound test. You can check the sound by playing a built-in melody sound
through the TV. 'Does the problem still exist with this sound test?' appears on the screen.
{_
If you hear no sound from the TV's speakers, before performing the sound test, make sure Speaker Semectis set to TV
speaker in the Sound menu.
{_
The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the MUT_ button.
® Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV. Contact Samsung's call center for assistance.
® No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device's user manual.
,
Signal Strength (digital channels onEy)
Unlike analog channels, which can vary in reception quality from 'snowy' to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
{_
If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
Continue to adiust the antenna until you find the best position with the strongest signal.
Advertisement
Table of Contents
