Msetting Up Me Tv With Your Pc - Samsung LN22B350 Series 3 350 User Manual

Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn't equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
iiiiii_
D-Sub and HDMI/DVJ input
/ "" , ' '--i Horizontal Frequency Vertical Frequency / Pixel Clock Frequency Sync Polarity _
Mode Kesotuuon
IBM 640 x 350 31.469 70.086 25.175 +/-
............................................. 832x.624 ..............
VESA CUT 720 x 576
1280 x 720
VESA DMT 640 x 480
640 x 486
646 x 486
800 x 606
806 x 600
800 x 600
!024 x 768
!024 x 768
!624 x 768
VESA GTF 1280 x 720
49.726
35.916
44.772
56.456
3!.469
37.506
37.861
37.879
46.875
48.077
48.363
56.476
60.023
47.712
52.506
30.240
74.55! 57.284 , -/-
59.950 32.750 -/+
59.855 74.500 -/+
74277 .................................................... 95:75Q.................................................... -/+
59.940 25.175 -/°
75.000 31.500 -/-
72.809 31.500 4-
60.317 40.000 +/+
75.000 49.500 +/+
72.188 56.060 +/+
60.004 65.000 4-
70.069 75.060 4-
75.029 78.750 +/+
66.015 85.500 +/+
(_ When using an HDMI / DVI cable connection, you must use the HDMm (DV0 mN jack.
C3
Setting up the TV with your PC
(Z_ Preset: Press the SOURCE button to select PC mode.
Auto Adjustment
Use the Auto Adiust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adiusts the frequency
values and positions.
,r_ Press the TOOL8 button to display the TooJs menu. You can also set the Auto Adiustment
by selecting Tools -> Auto Adjustment.
(_ This function does not work in DVI-HDMI mode.
C) Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then make the vertical frequency adiustments on your PC and fine tune again. After the noise has been reduced, re-adiust the
picture so that it is aligned on the center of the screen.
, Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine4uning alone,
then adjust the frequency as best as possible (Coarse) and Fine4une again. After the noise has been reduced, readiust the picture
so that it is aligned on the center of screen.
PC Position
Adjust the PC's screen positioning if it does not fit the TV screen. Press the & or • button to adjusting the VerticaFPosition. Press
the 4 or _button to adjust the Horizontal°Position.
Linage Reset
You can replace all image settings with the factory default values.