Connecting The Speakers; Back Of The Speakers; Back Of The Main Unit; Position Of The Dvd Player - Samsung HT-DB600 Instruction Manual

Digital home theater system
Hide thumbs Also See for HT-DB600:
Table of Contents

Advertisement

necting the Speakers
or installing the product, be sure to turn off the power and disconnect the power cord.
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under
the TV stand.
Front Speakers 00
• Place these speakers in front of your listening
position, facing inwards(about 45°) toward you.
• Place the speakers so that their tweeters will be at
the same height as your ear.
• Align the front face of the front speakers with the
front face of the center speaker or place them
slightly in front of the center speakers.
Center Speaker
• It is best to install it at the same heightas the front
speakers.
• You can also install it directly over or under the TV.
13
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from the
TV. Example: For 32" TVs 2~2.4m (6-Sleet)
For 55" TVs 3.5-4m (11-13feet)
Rear Speakers 00
• Place these speakers behind your _istening position.
• If there isn'tenough room, place these speakers to face each other.
• Place them about 60 to 90cm (2 to 3feet) above your ear, facing
slightly downward.
* Unlike the front and center speakers, the rear speakers are used
to handle mainly sound effects and sound will not come from
them all the time.
Subwoofer (_
• The position of the subwoofer is not so critical.
Place it anywhere you like.
• Usually, it is placed by a corner near the front speakers.
Press down the terminal
tab on the back of the
speaker.
\
\
2
Insert the wire into the
terminal and release the
terminal tab.
• Insertthe blackwireinto he black(-)
termicalandthe graywireinto the
gray(+) terminal.
• Makesurethe polarities(+and-)
arecorrectly.
3 Connect the connecting jacks (6)
to the back of the DVD player.
• Make sure the colors of the speaker terminals
match the colors of the connecting jacks.
• Make sure the polarities (+ and -) are correctly.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents