Refit Panel Jacks - Samsung LN-R408D Owner's Instructions Manual

GEN EP.AL INFORMATION
Rear Panel Jacks
Use the rear pane! jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For2, more information on connecting equipmem, see pages 7-17.
_]) PC iN
Connect to the video and audio output jack
on your PC.
HEADPHONE JACK
Connect a set of external headphones for
private listening.
_1) AUDIO OUT
Connect totheaudio input jackon your
Amplifier/Home theater.
Anynet OUTPUT
Referto 'AnynetAV Owner's Instructions".
SERVICE
Connectorforservice only.
COMPONENT iN
Connect component video/audio from a
DVD/Set-top box.
AM iN
Video and audio inputs forexternal
devices, such as a camcorder or VCR.
S-VIDEO iN
Video inputs for external devices with an
S-Video output, such as a camcorder or
VCR.
OPTICAL DiGiTAL AUDIO
OUT
Connect to a Digital Audio component.
_) HDMI/DVI
iN
Connect to the HDMI jack of a device with
HDMI output. Use the HDMI/DVl
terminal for DVl connection to an
external device. You should use the
DVI to HDMI cable or DVI-HDMI
Adapter (DVI to HDMI) for the connection,
and the 'R -AUDIO -L' terminal on DVblN for
sound output.
- HDMI/DVI IN terminal does not support PC.
- No sound connection is needed for an
HDMI to HDMI connection.
_) ANT iN
Connect to an antenna or to a cable TV
system. (See page 7_10)
_) CABLE CARD
Insert t hecableCARD into theslot.
_) POWER iNPUT
Connect the supplied power cord.
_) KENSINGTON
LOCK
Refer to 'Using the Anti-Theft Kensington
Lock" on page 111.
Speaker Aud!o Out
RF AV,S-Video Component PCHDNI
........................... L...................................
When "Internal mute" is set to "On", Sound menus except "MuRi-Track Options" and "Digita_ Output" cannot be adjusted.
Engils]l-3