List of Parts Accessories Remote Control (BN59-00460A) & Batteries (AAA x 2) Owner's Instructions Page 1 Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. RF Cable Power Cord (AA39-00039A) (3303-000085)
Connect an RF cable between the ANT OUT terminal on the VCR and the ANT1 IN (CABLE) or ANT 2 IN (AIR) terminal on the TV. Connect a video cable between the VIDEO OUT jack on the VCR and the AV IN [ VIDEO ] jack on the TV.
Connect an RF cable between the ANTOUT terminal on the VCR and the ANT1 IN(CABLE) or ANT 2 IN(AIR) terminal on the TV. Connect an S-video cable between the S-VIDEO OUT jack on the VCR and the [S- VIDEO ] jack on the TV.
Connecting a DVD Player DVD Player Rear Panel Connect an audio cable between the COMPONENT IN 1 [ R-AUDIO-L ] jacks on the TV and the AUDIO OUT jacks on the DVD player. Connect a component video cable between the COMPONENT IN 1 or COMPONENT 1 IN [P jacks on the TV and the COMPONENT [Y, P Each external input source device (DVD, STB, VCR etc.) has a different back panel...
Connecting an Amplifier/DVD Home Theater Amplifier/DVD Home Theater Connect an audio cables between the AUDIO OUT [R-AUDIO-L] jacks on the rear of your TV and the other ends to the corresponding audio in jacks on the Amplifier or DVD Home Theater.
BN68-00515U-X0Eng.qxd 1/5/05 10:00 PM Plug & Play When the TV is initially powered on, two basic customer settings proceed automatically and subsequently: Setting Auto program, Clock. Page 6 Press the POWER control. The message “Menu language, Channels and Time will be set.” is displayed. Press the ENTER of the OSD”...
Page 7
United States). Press the ENTER received a digital signal, the time will be set automatically. If not, see page 70 to set the clock. The message “Completed. Time will be updated automatically.” is displayed.
Displays help on the menu functions. To Select the Source Press the SOURCE button on the remote control You can select the TV mode or an input source (AV, S-Video, Component 1, Component 2, PC, HDMI) connected to the TV set. Use this button to choose an input source that you would like to watch.
Page 9
STB LED, VCR LED, CATV LED, or DVD LED is illuminated. NUMERIC BUTTONS Press to change the channel. Note: If you are trying to program this remote to use another manufacturer's DVD, VCR or Cable box, see page 31 of the owner's manual. Page 9 PRE-CH Tunes to the previous channel.
Page 10
Try another channel. Adjust the antenna. Check all wire connections. Page 10 If a still image is displayed for an extended period of time, residual images or blurring may appear. When you need to leave the TV unused for an extended period of time, adjust...