Samsung LN-R408D Owner's Instructions Manual page 36

OPERATION
Setting Up the Remote to Operate Your DVD
1 Turn off your DVD,
2
Press the MODE button and make sure that the DVD
appems on the LCD screen.
3 Press the SET button on your TV's remote co_trol.
Using
the _LllllbeI" buttons
on yo0r
remote co_tro], e_lter three
digits of the DVD code listed on page 3l of this manual tbr
yore brand of DVD. Make sure you enter three digits of the
code. even it the first digit is a _(P',
If there is more than oue code listed, t U the lirst one.
5 Press the Power button on the remote control. Your DVD
should turn on il your remote is set up correctly.
If your DVD does not turn on at_er set-up, repeat steps 2, 3 and
4, but t* T one of tile othel codes listed for your brand of DVD.
If no othel codes are listed, t_y each code. 000 through 009.
Note on Usi_g Remote Control Modes: DVD
Whel_ your remote control is in ' DVD" mode, the volume buttons stil! control your TV's volume.
Engiish-30