Listening Through A Receiver; Troubleshooting For Anynet - Samsung series 5 530 User Manual

Advanced Features
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theater) instead of the TV speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL} jack of the TV.
When the receiver (i.e Home Theater) is set to On, you can hear sound output from the TV's Optical jack. When
the TV is displaying a DTV (air) signal, the TV will send out 5.1 channel sound to the receiver, When the source is a
digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from
the receiver.
NOTE
" You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
" The TV remote control may not work under certain conditions, If this occurs, reselect the Anynet + device.
" The Anynet + functions do not operate with other manufacturers' products.
Troubleshooting for Anynet+
iiiiii_!_! @!i_i_i@i_ _ili !ili!!_i!i_i! i_ii_ii_iiii iiiili!ii_! i_ii_il _ii_ii_ii_ii_ii ililil ii!iiiilil ilili_ilili_ili_ iiiill iii_!!i_i_i_i_i _i_i_i_i_i_i_i_i ii!i_!_!ili!ii!i_i_,i_ii!iii!!iii!ii!iil i!i!i!i_i!i_i !i_i!i _i_i_i_i_i_ili!_} _i!!!_!!!!! !!!!!!!!!! !!!!!!!_!!_!!_ i!i!!i !_ii_iiiiii!iii!ii!!iii !ii!!iii!ii_i!_ii_i!_!_il !_iii_iii_i ii_iii_iii_iii_i ii_ili_!!!!_!!_!_i i!_iliiii_ii_i!!! !ii!!i iiii!i ii_ii i_iii_i!i_i!_i!_i!_ i!_i!_i iii_iiiiii!_ii_ii!i!!i!!i!!i!!i!!i!! i!!i!ii i!iiiiiii_!i!_iii iii!iii!iil !iii! iii!iiiiill iii!!i!_{_ii_i!_ii _ii_iiiii_ii!iiiii_ iiiii i!iiii iii!i iiiii i!iiii iii!i iiiii i!iiii iii!i _!_i!!!_!_! _!_!_!!_i_!_,_i_i_!_i_il !!i{_i!_ii_ii_!!i!_ii}ii_ili}_i!i}!i_ i!i_i!!_iliiii_ii _ii_ii_iii!iii !iiiiiiiii_ iiii!ii_iii! i i ilil ilili_ii_ii ii_iii _ii_ililJi iiiii_!!_i !i_i!i _i!i_iii_i iiiii_!i_ii iiiiii!!}
• Check if the devbe is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
• Only one receiver (home theater) can be connected.
• Check if the Anynet+ device power cord is properly connected.
• Check the Anynet+ device's Video/Audio/HDMI cable connections.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
• Check whether the TV remote control is in TV mode.
• Check whether the remote control is Anynet+ compatible.
• Anynet+ doesn't work in certain situations. (Searching channels, operating Media Play or Plug & Play
(initialsetup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your
TV off and on again.
• Check if the Anynet+ Function of Anynet+ devbe is set on.
I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is
set to On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+. ,, Select View TV in the Anynet+ menu.
,, Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
,, Press V OH iX, OH L_ST, PREoCH, and FA_4CHto change the TV mode. (Notethat the channel
button operates only when a tunepembedded Anynet+ device is not connected.)
The message 'Connecting to ,, You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Anynet+ device...' appears on ,, Use the remote control when the Anynet+ setting or switching to vies! mode is complete.
the screen.
The Anynet+ device does not ,, You cannot use the play function when Plug & Play (initial setup) is in progress.
play.
The connected device is not
displayed.
Anynet+ does not work.
The TV Program cannot be ,,
recorded.
The TV sound is not output ,, Connect the optical cable between TV and the receiver.
through the receiver.
,, Check whether or not the device supports Anynet+ functions.
,, Check whether or not the HDMI cable is properly connected.
,, Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
,, Search Anynet+ devices again.
,, You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support
Anynet+ functions.
,, If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a
power failure, please repeat the device scan.
Check whether the antenna jack on the recording device is properly connected.
2 English