Tools Needed For Installation; See Exhaust Requirements - Samsung DV203 User Manual

n ta ncj yo Ar trTer
TOOLS NEEDED FOR INSTALLATION
Hire a professional to install this dryer properly. If there is a service call performed as a result of poor setup,
adjustment, and connection, it is considered the responsibility of the installer. If you install the dryer you are
responsible.
Make sure you have everything necessary for proper installation.
1. A GROUNDED ELECTRICAL OUTLET is required. See Electrical Requirements. See page 12.
2. A POWER CORD for electric dryers (except Canada). See page 13.
3. GAS LINES (if a gas dryer) must meet national and local codes.
4. EXHAUST SYSTEM - must be rigid metal or flexible stiff-walled metal exhaust ducting.
SEE EXHAUST REQUIREMENTS
Control panel
Door
IAdjustable leg
Pliers
Level
Cutting knife
PhiMps Screwdriver
/
Pipe wrench (gas only}
©
Duct tape
Nut drivers
Crescent spanner
hstaling your dryer 7