Related Manuals for Samsung DV25B6900H Series
Summary of Contents for Samsung DV25B6900H Series
- Page 1 Dryer User manual DV25B6900H* DV6900B_SimpleUX_WEB_Heatpump_EN.indd 1 2022/8/30 17:01:52...
-
Page 2: Table Of Contents
Contents Safety information What you need to know about the safety instructions Important safety symbols CALIFORNIA PROPOSITION 65 WARNING Important safety precautions Warnings Cautions Regulatory notice FCC Notice IC Notice Open Source Announcement Installation requirements Key installation requirements Location considerations Electrical requirements Installation What’s included... - Page 3 Operations Control panel Operating a cycle Cycle overview Options Settings Special features Cycle chart Drying guide Maintenance Control panel Tumbler Stainless steel tumbler Dryer exterior Lint filter Water tank Heat exchanger Troubleshooting Checkpoints Information codes Specifications Fabric care chart Protecting the environment Specification sheet English 3 DV6900B_SimpleUX_WEB_Heatpump_EN.indd 3...
-
Page 4: Safety Information
Safety information Congratulations on your new Samsung dryer. This manual contains important information on the installation, use and care of your appliance. Please take some time to read this manual to take full advantage of your dryer’s many benefits and features. - Page 5 WARNING - Risk of Fire • Clothes dryer installation must be performed by a qualified installer. • Install the clothes dryer according to the manufacturer’s instructions and local codes. • Do not install a clothes dryer with flexible plastic venting materials. If flexible metal (foil type) duct is installed, it must be of a specific type identified by the appliance manufacturer as suitable for use with clothes dryers.
-
Page 6: California Proposition 65 Warning
Safety information WARNING - To reduce the risk of fire or explosion: • Do not dry items that have been previously cleaned, washed, soaked, or spotted with gasoline, dry cleaning solvents, or other flammable or explosive substances. They emit vapors that could ignite or explode. -
Page 7: Important Safety Precautions
Important safety precautions WARNING To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: 1. Read all instructions before using this appliance. 2. Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode. -
Page 8: Warnings
Safety information 18. Do not insert your hand under the dryer. This may result in injury. 19. Take care that children’s fingers are not caught in the door when closing it. This may result in injury. Warnings WARNING • Ensure pockets are free of small, irregularly shaped hard objects and foreign material, i.e. coins, knives, pins, etc. - Page 9 • Residual oil on clothing can ignite spontaneoulsy. The potential for spontaneous combustion increases when items containing vegetable oil or cooking oil are exposed to heat. Heat sources such as your dryer can warm these items, allowing an oxidation reaction in the oil to occur. Oxidation creates heat. If this heat cannot escape, the items can become hot enough to catch fire.
-
Page 10: Regulatory Notice
Regulatory notice Regulatory notice FCC Notice CAUTION Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of FCC Rules. Operation is Subject to following two conditions: 1. -
Page 11: Ic Notice
IC Notice The term “IC” before the radio certification number only signifies that Industry Canada technical specifications were met. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. -
Page 12: Open Source Announcement
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: The official Declaration of conformity may be found at http://www.samsung.com, go to Support > Search Product Support and enter the model name. -
Page 13: Installation Requirements
Installation requirements Read through the following instructions before installing the dryer and keep this manual for future reference. WARNING Certain internal parts are intentionally not grounded and may present a risk of electric shock only during servicing. Service Personnel - Do not contact the following parts while the appliance is energized: Control board and inlet valve. - Page 14 Installation requirements Dimensions Type Front loading dryer Models DV25B6900H* A. Overall height 33.5 (850) B. Width 23.6 (600) Dimensions (in. (mm)) C. Depth with door open 43.3 (1101) D. Depth 25.8 (655) English DV6900B_SimpleUX_WEB_Heatpump_EN.indd 14 2022/8/30 17:01:53...
- Page 15 Clearance requirement This clearance requirement is applicable for dryers only. NOTE • For washer's clearance requirement, see the washer's user manual. • If the washer and dryer have different clearance requirements, use the one with the larger value. Alcove or closet installations WARNING •...
- Page 16 NOTE Stacking (SK-DH) Many of Samsung's washers and dryers can be stacked to maximize usable space. You can purchase an optional stacking kit from your Samsung retailer. For details about stacking and compatible models, refer to the user manual included in the stacking kit you purchase.
-
Page 17: Electrical Requirements
Electrical requirements The wiring diagram is located on the plate under the control panel or rear frame. WARNING • Improperly connecting the equipment grounding conductor can result in a risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether your dryer is properly grounded. - Page 18 Installation requirements • The power cord is not provided with U.S. electric model dryers. This cord is sold separately. Risk of Electric Shock WARNING • When local codes allow, you can connect the dryer’s electrical supply with a new power supply cord kit, marked for use with a dryer, that is U.L.
-
Page 19: Installation
What’s included Make sure all the parts are included in the product package. If you have a problem with the dryer or the parts, contact a local Samsung customer center or the retailer. 01 Top cover 02 Water Tank... - Page 20 • The stacking kit allows the dryer to be stacked on top of a washer. Please note that the stacking kit can only be used with Samsung washers and dryers. To purchase a bracket stacking kit, contact a Samsung service center or local appliance retailer. The stacking kit differs with the washer model.
- Page 21 Step-by-step installation Make sure you have a qualified technician install the dryer. Step by step installation instructions start below. STEP 1 Connect the electrical wiring First, read through the “Electrical requirements” section, and then follow the instructions on this page or the next page. Instructions for a 3-wire system are on this page. Instructions for a 4-wire system are on the next page.
- Page 22 Installation For a 4-wire system Remove the external ground connector’s screw, and connect the ground wire (green or unwrapped) of the power cable to the screw. CAUTION • To connect the ground wire to the neutral position without through contact A (cabinet ground), contact a technician.
- Page 23 • Remove the terminal block cover plate. • Insert the power cord with a UL-listed strain relief through the hole provided in the cabinet near the terminal block. • A strain relief must be used. • Do not loosen the nuts already installed on the terminal block. Be sure they are tight. •...
- Page 24 Installation NOTE • The dryer can be levelled using either or both of the front and rear legs of the dryer. • To set the dryer to the same height as the washer, fully retract (C) the levelling legs by turning them counter clockwise, then loosen (D) the legs by turning them clockwise.
-
Page 25: Drain Hose (If Necessary)
Drain hose (if necessary) Important: This dryer comes with a built in water tank that stores water captured by the dryer from drying clothes. The water tank must be emptied manually before or after each load. See page 45. However, you can install the provided long drain hose as described below and have the water empty directly into a nearby sink or drain pipe automatically. - Page 26 Installation 2. Insert one end of the accessory hose (the long drain hose) into hole (A). 3. Position the other end (the outlet) over a laundry sink or connect it to the drain pipe of a laundry sink. See the instructions below or on the next page.
- Page 27 CAUTION • Connect the hose guide (A) within 6 in. (15 cm)* of the end of the drain hose. If the drain hose is extended beyond the end of the hose guide, mold or microorganisms could spread inside the dryer. •...
-
Page 28: Installation Checklist
Installation Installation checklist • The dryer is plugged into a properly grounded outlet. • All packaging material is completely removed and properly disposed. • The dryer is level and standing firmly on the floor. • The long drain hose is installed if you want water captured by the drying process drained automatically. •... -
Page 29: Switching The Door Position
Switching the door position To reverse the direction of the door, we recommend that you contact a qualified technician and have the technician follow the directions below. 1. Remove the door packing from the door. Remove the screws on the inner glass holder of the door. - Page 30 Installation Remove the hinge screws, and then detach the door. - Loosen and remove the 2 bolts on the door frame. - To prevent abrasion on the bolts, use a hex screwdriver. Remove the 2 holder screws on the left frame, and then remove the 2 bracket screws on the right frame.
- Page 31 Remove the bottom screw on the right frame, and then insert it in the corresponding hole on the left frame. Insert the 2 removed bracket screws in the left frame as shown. - See the figure on the left for the correct position of the screws.
- Page 32 Installation Insert the inner glass holder in the door cover that has been installed on the right frame. Tighten the 3 screws on the top and 3 screws on the bottom. Attach the door packing to the door. English DV6900B_SimpleUX_WEB_Heatpump_EN.indd 32 2022/8/30 17:01:59...
-
Page 33: Before You Start
Before you start Here are a few things you should know before starting your dryer. Initial setup • When you turn on your dryer for the first time, the screen shows the initial setup process. Follow the on-screen instructions to complete it. •... -
Page 34: Sort And Load
Before you start Sort and load • Put one wash load in the dryer at a time. • Do not mix heavy and lightweight items together. • To improve drying efficiency for one or two items, add a dry towel to the load. •... -
Page 35: Operations
Operations WARNING To reduce the risk of fire, electric shock, or injury, read the “Safety information” before operating this appliance. Control panel Tap to turn the dryer on or off. • If you do not manipulate the control panel for 10 minutes after the dryer is turned on, the dryer automatically turns off. - Page 36 Operations Wrinkle Prevent can only be adjusted in Wrinkle Prevent cycle. Tap to change the 07 Wrinkle Prevent Wrinkle Prevent of the current cycle. Tap to select the cycle time for Small Load, Time Dry, Rack Dry, Air Fluff or Wrinkle 08 Time Away.
-
Page 37: Operating A Cycle
Operating a cycle 1. Tap to turn on the dryer. 2. Turn the Navigation dial to select the cycle you want. For more information on “Cycle overview”, see page 38. 3. Tap Dryness, Wrinkle Prevent, or Time to change the default cycle settings. 4. -
Page 38: Cycle Overview
Operations Cycle overview NOTE Other cycles can be used after adding them to your cycle list using the My Cycles function. For more information, see the “My Cycles” section on page 40. Cycle Description Normal For most fabrics including cottons and linens. Time Dry You can specify a cycle time by a 10-minute unit. -
Page 39: Options
Options Using Options 1. Tap Options. 2. Turn the Navigation dial to select the desired additional function. 3. Tap OK to change the selected function’s settings or start the function. NOTE • To return to the main screen, tap Options again or turn the Navigation dial to select Back and tap OK. •... - Page 40 Operations Damp Alert This function alerts you when shirts and other items that require ironing are dry enough to be suitable for ironing. 1. Select a cycle and change the cycle settings as necessary. This function is available for Normal, Heavy Duty, Delicates, Perm Press, Towels and Denim with Dryness set to 2-5.
- Page 41 Child Lock To prevent children or infants from accidentally starting or setting the dryer, Child Lock locks all buttons except for and Options. 1. Close the door. 2. Tap Options. 3. Turn the Navigation dial to select Child Lock, and then tap OK. 4.
-
Page 42: Settings
Operations Settings Using Settings 01 * * Tap and hold 3 seconds. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial and select the desired setting, and then tap OK. 3. Tap OK to change the selected function’s settings or start the function. NOTE •... - Page 43 Sound You can turn on or off the sound from the dryer. 1. Tap and hold Options for 3 seconds. 2. Turn the Navigation dial to select Sound, and then tap OK. 3. Tap OK to select On or Off. The default setting is On.
-
Page 44: Special Features
Operations Special features Smart Control You can connect to the SmartThings app and control your dryer remotely. (Smart Control for electric model. Connecting your dryer • Download and open the SmartThings app on your mobile device • Tap to turn on the dryer. •... - Page 45 • This appliance supports the Wi-Fi 2.4 GHz protocols. Download On an app market (Google Play Store, Apple App Store, Samsung Galaxy Apps), find the SmartThings app by searching for “SmartThings”. Download and install the app on your device. NOTE The app is subject to change without notice for improved performance.
-
Page 46: Cycle Chart
Operations Cycle chart NOTE For best results, follow the load size recommendations for each dry cycle. • Large load: Fill the drum to about full. Do not add items over this level as they need to tumble freely. • Medium load : Fill the drum to about full. - Page 47 NOTE : factory setting, : can be selected Options Cycle Time Damp Alert Wrinkle Prevent Normal Perm Press Mixed Load Heavy Duty Denim Delicates Wool Bedding Activewear ...
-
Page 48: Drying Guide
Operations Drying guide The best way to dry items is to follow the instructions on the care label. If no drying instructions are provided, see the following table for reference. Items Description Follow the care label instructions or dry using Bedding. Bedspreads &... -
Page 49: Maintenance
Maintenance WARNING • Do not clean the dryer by directly spraying water onto the dryer. • Do not clean the dryer with benzene, thinner, alcohol, or acetone. This may cause discoloration, deformation, damage, electric shock, or fire. • Before cleaning the dryer, be sure to unplug the power cord. •... - Page 50 Maintenance 1. Open the door and pull the lint filter upward to remove. 2. Open the outer filter and remove the inner filter (A). 3. Unfold both the inner filter and the outer filter. 4. Remove the lint from both filters, and then clean the filters with the cleaning brush.
-
Page 51: Water Tank
5. Put the inner filter into the outer filter, and then reinsert the lint filter into its original position. CAUTION • Clean the lint filter after each load. Otherwise, the drying performance may decrease. • Do not operate the dryer without the inner filter inside the outer filter. •... -
Page 52: Heat Exchanger
Maintenance Heat exchanger Clean the heat exchanger at least once a month. As a reminder, the heat exchanger indicator ( ) lights up on the display when the heat exchanger needs to be cleaned. 1. Gently press the top part of the outer cover (A) to open. - Page 53 4. Clean the heat exchanger with the provided cleaning brush or a vacuum cleaner with a brush attachment. Take care not to bend or damage the heat exchanger fins when cleaning. This may lead to a decrease in drying performance. CAUTION •...
-
Page 54: Troubleshooting
Troubleshooting Checkpoints If you encounter a problem with the dryer, first check the table below and try the suggestions. Problem Action • Make sure the dryer is plugged in. • Make sure the door is properly closed. • Check the fuse or reset the circuit breaker. Dryer does not start. - Page 55 Extended time. The drying time can change according to the type and amount of laundry. See the cycle chart for reference. If a problem persists, contact a local Samsung service center. English 55 DV6900B_SimpleUX_WEB_Heatpump_EN.indd 55 2022/8/30 17:02:05...
-
Page 56: Information Codes
• If this information code remains, contact a Samsung service center. Incorrect door switch. Contact a Samsung service center. If any information code keeps appearing on the display, contact a Samsung service center. English DV6900B_SimpleUX_WEB_Heatpump_EN.indd 56 2022/8/30 17:02:05... -
Page 57: Specifications
Specifications Fabric care chart The following symbols provide garment care Normal direction. The clothing care labels include symbols Permanent press/Wrinkle resistant/ for drying, bleaching, ironing, and dry cleaning. Wrinkle control The use of symbols ensures consistency among garment manufacturers of domestic and imported Gentle/Delicates items. -
Page 58: Protecting The Environment
Specifications Warning symbols for laundering Dry-clean Do not wash Dry-clean Do not wring Do not dry-clean Do not bleach Line dry / Hang to dry Do not tumble dry Drip dry No steam (added to iron) Dry flat Do not iron Protecting the environment This appliance is manufactured from recyclable materials. - Page 59 Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center to receive warranty service.
- Page 60 LIMITED WARRANTY (U.S.A.) Visits by an authorized servicer to explain product functions, maintenance or installation are not covered by this limited warranty. Please contact SAMSUNG at the number below for assistance with any of these issues. EXCLUSION OF IMPLIED WARRANTIES IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW.
- Page 61 Warranty service can only be performed by a SAMSUNG authorized service center. The original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. SAMSUNG will provide in-home service during the warranty period at no charge, subject to availability within the Canada.
- Page 62 (English) www.samsung.com/ca_fr/support (French) Visits by a Service Engineer to explain functions, maintenance, or installation is not covered by warranty. Please contact the Samsung call center at the number above for help with any of these issues. English DV6900B_SimpleUX_WEB_Heatpump_EN.indd 62...
- Page 63 DV6900B_SimpleUX_WEB_Heatpump_EN.indd 63 2022/8/30 17:02:09...
- Page 64 If you change the factory default setting or enable other features, power consumption could increase and exceed the limits qualified for ENERGY STAR. QUESTIONS OR COMMENTS? COUNTRY CALL OR VISIT US ONLINE AT U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com/us/support www.samsung.com/ca/support (English) CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca_fr/support (French) DV6900B_SimpleUX_WEB_Heatpump_EN.indd 64 2022/8/30 17:02:09...