ProScan PS50710 User Manual page 17

INTERACTIVE SETUP
Select Yesif the cable box changed to channel 9, or No if it did not. If you select No, the system will try another code.
If the GUIDE Plus+ Gold System cannot recognize either your cable box or VCR after several tries, a screen stating
"Cable Box (VCR) test failed...Please consult your manual and try again" appears. You have a choice to either TryAgain
or Skip Cable Box Setup. If you get this message, you should also:
• Double check the brand of your cable box or VCR, and try entering it again.
• Check to make sure the G-LINK wands are positioned correctly.
If you choose to skip the cable box (or VCR) setup some features of the guide may not be available until you successUly
complete this procedure.
Once the correct model of cable box has
been identified, you need to set the cable
box's output channel. Enter the channel
you use to view channels through your
cable box--usually 3 or 4. Consult your
cable box's instruction book or your
cable company if you are not sure.
Choose 0to use VIDEO INPUT.
Select YESif you have a VCR, or NO if not.
(Answering NO automatically skips forward
to the end of GUIDE Plus+ Gold setup.)
Tune your VCR to channel 2 and turn it off.
Enter the brand of your VCR.
RCA
When the GUIDE Plus+ Gold System
correctly identifies the correct code for
your VCR, the VCR's tuner changes to
channel 9.
Select YESif the VCR automatically
changed to channel 9, or NO if it did not.
If you select NO, the system will try
another code.
The last screen that comes up after you've successfully finished the
GUIDE Plus+ Gold setup gives you an opportunity to view a demo. If you
don't want to view the demo, highlight EXIT and press OK.
Remember:
• Leave your cable box turned ON to download program information.
• Leave your VCR turned OFF to record programs and download
program information.
15