RCA L42FHD2X48 User Manual page 63

Connecting a Component with Composite Video (Good)
To connect a component with a video output jack, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect your cable and/or off-air antenna as described on page 9.
2. Connect the video cable to the (VlD 2) VIDEO jack on the side of the TV and to the video output jack on
the DVD player.
3. Connect the red and white audio cables to the (VlD 2) right and left audio jacks on the side of the TV and
to the audio output jacks on the DVD player.
Composite Video Connection
This is an example of a connection using the composite video jack.
Don't forget:
It necessary, connect
antenna or cab/e to get
a picture. Go to page 9
t:_r instructions.
Connecting a Component with Component Video (Better)
To connect a component that has Y Pb Pr jacks, such as a DVD player, follow these steps:
Example: DVD Player
1. Connect your cable and/or off-air antenna as described on page 9.
2. Connect three video cables or special Y Pb Pr cables to the COMPONENT INPUT (CMPT) Y Pb Pr jacks
on the back of the TV and to the Y Pb Pr outputs on the DVD player.
3. Connect your red and white audio cables to the COMPONENT INPUT (CMPT) right and left AUDIO jacks
on the back of the TV and to the audio output jacks on the DVD player.
Connections and Setup ::;
11