RCA J32430YX58CJ6 User Manual page 13

Arrows Use the navigation arrows to move the on-screen highlight
up, down, left, or right. Using the arrows to highlight a menu item is
also called "pointing."
OK Selects the highlighted choice.
MENU Displays the basic Main menu. If you are already in the menu
system, press OK or MENU to select a highlighted choice. When you are
using the remote control to operate an RCA, GE, or PROSCAN VCR (and
the remote is in VCR mode), the MENU button functions as a PROGRAM
button.
CLEAR Removes the on-screen displays and returns you to normal
viewing.
Digit Buttons (0 - 9) Selects any channel number or numbered menu
option. Two digits must be pressed for each channel. Press 0 then 6 for
channel 6. For three digit channels, press and hold 1 until 1-- appears on
the screen. Then press the other two digits.
WHO, INPUT Scrolls through possible input choices. See the "Using the
Input Button" description later in this section for more information.
ANTENNA In TV mode, lets you switch the source of the video signal
from satellite signals to an off-air antenna or cable signal when using
the OUTTO TV jack. In VCR mode, functions as a TV/VCR input button.
Transport Buttons (REVERSE, PLAY, FORWARD, RECORD, STOP,
PAUSE) When programmed, these buttons are used to control an
auxiliary device, such as a VCR or laserdisc player.
PIP buttons (PIP, SWAP, CH CTRL,) These buttons are not functional
with this product.
RESET Returns the picture to the original settings and displays the
Picture Presets choice list.
11