Table of Contents
Advertisement
UN IVERSAL
REMOTE
BUTTONS
(CRK76TK1)
LED
ON.OFF
Turns the device you are controlling
on or off. When pressed
twice within
two seconds, all devices that are on will be turned off (this
feature
only works with most RCA, PROSCAN, and GE products).
You can
also use the ONoOFF button
on the front
panel of the TV to turn it on
or off.
VCR
When programmed,
tells the remote to control the VCR.
TV
Tells the remote to control the TV.
DVD
Tells the remote to control the DVD player. Note that this button
is only functional
with GE, RCA, and PROSCAN DVD players.
VCR2
When programmed,
tells the remote to control
a second VCR.
LED
This light turns red at each valid button
press. When
programming
the remote control,
it flashes or turns on or off to indicate
programming
status.
AUX
Acts as a "wildcard"
button.
It can be programmed
to control
another
VCR, TV, satellite
receiver or cable box. Or, it can be
programmed
to control
an RCA, GE, or PROSCAN audio device. Follow
the direct entry programming
instructions,
later in this section, to
program this button.
DIRECTV
When programmed,
tells the remote to control
the digital
satellite
receiver.
MUTE
When programmed,
reduces the TV's volume to its minimum
level. Press again to restore the volume.
SKIP (Commercial
Skip)
If you press this button
before you change
the channel, the TV waits 30 seconds then takes you back to the original
channel.
Each press adds 30 seconds to the skip time. Press CLEAR to
cancel. Also functions
as RESETin some menus.
CH + (up) I- (down)
Use to scan up and down through
the channels in
the current channel list. You can also use the CH +I- buttons
on the TV's
front panel to change the channel.
VOL < (down)
and > (up)
Adjusts the audio volume of the TV.
CC (Closed Captioning)
Brings up the Closed Captioning
Display.
Subsequent
presses change the display mode.
SYSTEM
This button
allows the remote to change between
TV1 and
TV2 mode. It also allows access to system-defined
functionality,
when
available.
See the description
later in this section for more details.
GO BACK
Moves you back and forth
between
the last two selected
channels. In the menu system, returns you to the previous screen.
GUIDE
Displays or clears the Channel Guide (during
normal TV
viewing
only).
INFO
Displays or clears the Status Display.
CC
_,
GO BACK
GUIDE
STEN_
ENFO
MENU
CLEAR
10
ANTENNA
0
REVERSE
PLAY
FORWARD
RECORD
STOP
PAUS£
_IP
SWAP
CHCTR[
RESET
OOO©
Some buttons on universal and basic
remotes have different names, but the
same function.
A list of such buttons
follows:
CRK17TC1
CRK76TK1
ON. OFF
POWER
WHO. INPUT
INPUT
]
10
Hide quick links:
Advertisement
Table of Contents
