Table of Contents
Advertisement
Showing the Demonstration
In aft mode, pressDIMMERiDEMO to turn on/off
magic demonstration except timer on or sleep mode
is active,
Activating the Timer
O
Pressand release TIMER to turn on/off
the alarm. The alarm is active when the
clock icon indicator is lit.
DISPLAY TIMERICLOCK
Setting the Time
1. Pressand hold CLOCK until the hour flashes on
the display.
2. PressSKIP BACKWARD _
_or
SKIP FOR-
WARD _
_
to set the hour and then press
CLOCKto shift to minute digits.
3. PressSKIP BACKWARD _
_
or SKIP FOR-
WARD :_
tosettheminute.
4. PressSETto save settings and STOP to quit set-
ting.
Adjusting the Display Brightness
1. Pressand hold DIMMER/DEMO for more than 2
seconds.
2. While the dimmer is dis-
played, press and release
DIMMER/DEMO
to select the
desired level (DIMM 1 - 3).
ltllilil
Note:You can only adjust the dimmer level when
unit is in ON mode, in standby mode the dimmer
level remains at DIMM 3, while in magic demo mode
the dimmer level wi[I be at D_MM 1,
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
Setting the Timer
I. Pressand hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, pressSKIP FORWARD _
_
I
BACKWARD _
_
to set the hour and then
pressTIMER to shift to minute digits.
3. PressSKIP FORWARD _
_
/ BACKWARD
_to
set the minute.
4. PressTIMER to change to OF (timer off time) with
hour flashing. Repeat steps 2 & 3 for timer off time
setting.
5. PressTIMER to select source. PressSKIP FOR-
WARD _
_
I BACKWARD _
_
to select
between CD/TUNER / TAPE)
6. PressTIMER to set volume. Rotate the VOLUME
knob to set desired volume level.
7. PressSETto savesettings or STOP to quit setting.
Sleep Mode
You can select the time interval in minutes before
the unit turns off automatically. PressSLEEPon the
remote to select among 120, 90, 60, 45, 30, 15 & 5
minutes. (Remote Only)
6_
Advertisement
Table of Contents
