Table of Contents
Advertisement
RS2518/19-EN
6/21/01
Display
Showing the Demonstration
Not operational in CD mode. Press DEMO/DIMMER
to turn on/off demonstration mode. The demonstra-
tion scrolls through all display operations.
DISPLAY ALARM/CLOCK
Setting the Time
1. Press and hold CLOCK until the hour flashes on
the display.
2. Press SKIP BACKWARD or SKIP FORWARD to set
the hour and then press CLOCK to shift to minute
digits.
3. Press SKIP BACKWARD or SKIP FORWARD to set
the minute.
4. Press SET to save settings and STOP to quit set-
ting.
Note: When system is ON, you can press CLOCK to
display the current time for about 2 seconds.
Setting the Timer
1. Press and hold TIMER until the ON appear with
the hour flashing ( ON - timer on time )
2. For setting time, press SKIP FORWARD / BACK-
WARD to set the hour and then press TIMER to shift
to minute digits.
3. Press SKIP FORWARD / BACKWARD to set the
minute.
4. Press TIMER to change to OF (timer off time) with
hour flashing. Repeat steps 2 & 3 for timer off time
setting.
5. Press TIMER to select source. Press SKIP FOR-
WARD / BACKWARD to select between CD /TUNER /
AUX / TAPE)
6. Press TIMER to set volume. Rotate the VOLUME
knob to set desired volume level.
7. Press SET to save settings or STOP to quit setting.
2:20 PM
Page 9
Activating the Timer
Press and release TIMER to turn on/off
the alarm. The alarm is active when the
clock icon indicator is lit.
Adjusting the Display Brightness
1. Press and hold DEMO/DIMMER for more than 2
seconds.
2. While the dimmer is dis-
played, press and release
DIMMER to select the desired level (DIMM 0 - 3).
Sleep Mode
You can select the time interval in minutes before
the unit turn off automatically. Press SLEEP on the
remote to select among 120, 90, 60, 45, 30, 15 & 5
minutes. (Remote Only)
EN
DIM 2
5
Advertisement
Table of Contents
