Connecting Audio Components - RCA P46733 Owner's Manual

CONN ECTINGAUDIO COMPON ENTS
CONNECTING A STER_EO AMPLIFIER
t.
.
Connect the amplifier's TV audio inputs to the left (U
MONO) and right (R) HI-FI OUTPUT jacks.
You may prefer to turn off the TV's internal speakers by
selecting Speakers from the Audio menu, then turning the
speakers off.
If your audio amplifier is part of a system that uses its own
remote control, you may prefer to connect it to the TV
using the Fixed Output jacks.
Important: Do not use the amplifier's PHONO inputs. If
the amplifier is not stereo, use the L/MONO HI-FI OUT
jack. Consult the amplifier's owner's manual for the
manufacturer's recommended hookup.
CONNECTING A TAPE DECK
To use a tape deck to record audio from TV:
11. Connect the tape deck's audio inputs to the FIXED
OUTPUT jacks on.the back of the TV.
The FIXED OUTPUT jacks pr()vide
a fixed level audio signal, making
them ideal for audio recording,
Or for use with an audio amplifier
that has its own remote control.
No matter how the volume chang-
es on the TV, the output volume
stays the same.
• • . #_
69