Table of Contents
Advertisement
Troubleshooting
Troubles sometimes
are caused by simple "faults"
that you can
correct without
the help of a service technician.
If you experience
any difficulty
with your TV, check a few basic remedies before
calling your service technician.
TV
will not turn
on
Check to make sure it is plugged
in.
Check the wall receptacle
(or extension
cord) to make sure it is
"live"
by plugging
in something
else.
Maybe batteries
in remote control are "dead."
Maybe remote control is not aimed at remote sensor.
The front panel controls
may be locked (disabled).
Use the
remote control to unlock the front panel controls
by selecting
the Front Panel Block in the Parental Controls
menu and
choosing
View.
Controls
don't
work
If using remote control,
make sure remote is in TV mode by first
pressing TV button.
The front panel controls
may be locked (disabled).
Use the
remote control to unlock the front panel controls
by selecting
the Front Panel Block in the Parental Controls
menu and
choosing
View.
Try unplugging
set for two minutes
and then plug it back in and
turn it on again.
Problems
with
remote
Maybe something
is between the remote and the remote
sensor.
Maybe the remote is not aimed directly
at the component
(TV or
VCR) you are trying to control.
Maybe remote is not in TV mode.
Press the TV button so
remote will control TV.
Maybe batteries
in remote are weak, dead or installed
incorrectly.
Try replacing
batteries. (Note, if you remove the
batteries, you may have to reprogram
the remote to control
other components.)
Remove batteries and hold number
1 for at least 60 seconds to
drain the microprocessor
inside the remote.
Release number
1,
replace the batteries, and (if necessary)
reprogram
the remote.
49
Advertisement
Table of Contents
