Table of Contents
Advertisement
Setting the Time
The next step in the Interactive Setup lets you set the time
of day.
1.
Press MENU or OK to bring up the Set Time control
panel.
2.
Use the left and right arrows to point to the hour and
minutes spaces. Use the digits to enter the numbers and
the up and down arrows to change from AM to PM.
3.
Press MENU or OK to continue.
Setting the VCR1 Channel
(Auto
Tuning)
The next step lets you set the VCR1 channel. When you set
the VCR1 channel, you're telling the TV what channel to
tune to when you press the VCR1 button on the remote.
This is called auto tuning.
Indicate which input you used to connect the VCR. If you
don't have a VCR1 component
connected
to the TV, skip this
step or select Not Connected from the VCR1 Channel choice
list. (For more, see Auto Tuning in the Using the Menu
System section.)
1.
Press MENU or OK to bring up the VCR1 choice list.
2.
Point to the choice that matches the way you have your
VCR connected
to the TV.
3.
Press MENU or OK to continue.
16
Advertisement
Table of Contents
