Advertisement
Quick Guide to Your TV
Startup
5. Adjust
PICTURE
TILT.
Picture tilt is used to correct a tilt-
ed picture from the effect of the
Earth's magnetic field on a large
picture tube. The PICTURE TILT
STRENGTH and POLARITY
switches on the back of the TV
compensate
for this effect. If the
picture appears tilted, follow these
steps to improve it.
You may need to reset the switch-
es if the TV is moved or reposi-
tioned
in the room.
+
BACK OF TV
OFF
HiGH
LOW
POLARITY
STRENGTH
PICTURE TILT
A. Make sure STRENGTH
switch
is in the OFF position.
B. Move STRENGTH
switch to the
LOW position.
If this does not
fully improve
tilt, move
STRENGTH
switch to HIGH.
This should correct tilt. If
moving
STRENGTH
switch
makes tilt worse, return it to
OFF and go to the next step.
C. Change
the position of
POLARITY
switch.
If this
improves
the tilt but does not
fully improve
it, move the
STRENGTH
switch to LOW or
HIGH.
This should correct tilt.
6. Place all available
channels
in memory
(AutoProgram)
Details for adding and deleting
channels are on page 20.
Controls
Alarm
Ad
13
A. Press MENU°PROG until the
Setup menu is selected.
This
menu is white.
B. Press MOVE • to highlight
Autoprogram.
C. Press MOVE • to start placing
channels
in the TV's memory.
D. Wait until TV has cycled
through
all the channels
and
returns to original channel.
7. Set the Time
12:21 AM
13
A.
B.
C.
D.
Press MENU°PROG until the
Alarm menu is selected.
This
menu is green.
The Clock is automatically
highlightedthe
first time you
set it. If it is not, press MOVE •
(down) to highlight
it.
Press MOVE • to set the hour.
Press MOVE • to set the
minutes.
Advertisement
