ProForm XP 690t User Manual page 8

3. 3
Identify theRightUpright ( 85)andthe Right
Upright S pacer ( 91), w hicharemarked with
"Right" s tickers. AligntheovalholeintheRight
Upright S pacer w iththeovalholeintheBase
(95).Iftheholesdonotlineup,turnthe Right
Upright S pacer a ndtryagain.
Insert t he Upright Wire(87)through theRight
Upright S pacer ( 91)asshown. S etthe Right
Upright S pacer o ntheBase(95).
Havea second person holdthe RightUpright
(85)neartheBase(95).Seethe insetdrawing.
Tiethewiretie intheRightUpright s ecurely
around theendoftheUpright Wire(87).Then,
pulltheotherendofthewiretieuntiltheUpright
Wireisrouted completely t hrough the Right
Upright.
87
Tie
85
Oval
Hole
,
Hold a Bolt Spacer (14) inside the lower end of
the Right Upright (85). Insert a 3/8" x 4 1/4"
Patch Bolt (7) with a 3/8" Star Washer (11) into
the Right Upright and the Bolt Spacer. Repeat
this step with a second Bolt Spacer (14), 3/8"
× 4 1/4" Patch Bolt (7), and 3/8" Star Washer
(11).
Hold the Right Upright (85) against the Right
Upright Spacer (91). Be careful not to pinch
the Upright Wire (87). Tighten the 3/8" x 4 1/4"
Patch Bolts (7) until the heads of the Patch Bolts
touch the Upright; do not fully tighten the
Patch Bolts yet.
4
85
7
---. _ .,- _._- 87 ->', _