Top View - ProForm CROSSWALK 380 User Manual

11. With the help of a second person, carefully
lower the Left Upright (not shown) and the Right
Upright (54) to the floor.
Attach the ground wire on the Wire Harness (39)
to the indicated hole in the Base (52) with an M4
x 10mm Ground Screw (84).
11
Hole
Ground
39
84
12. See the lower drawing. Position the Uprights
(53, 54) so that the Frame (51) is centered be-
tween them.
Firmly tighten the two M10 x 60mm Patch Bolts
(1) and the four M10 x 58mm Bolts (2) (only one
side is shown). Be careful not to overtighten
the MIO x 60ram Patch Bolts. Raise the
Uprights (53, 54).
12
54
1
53, 54
Top View
51
53
12