Connecting Your TV
Home Antenna
Connections
Follow one of the steps below to connect an indoor or outdoor antenna
to
your TV
(not
a cable-TV
system).
A
./"]k If the antenna cable coming from your home antenna is a 75-ohm round coaxial cable that carries only VHF (channels 2- ! 3),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Cable
ANTENNA
From
,..
_
_
Back
Home
_
of
TV
Antenna
VHF or UHF Only
or
VHF/UHF Combination
B
-OR-
If the antenna cable coming from your home antenna is a 300-ohm flat twin lead that carries only VHF (channels 2-13),
only UHF (channels 14-69), or VHF and UHF channels, connect it to your set like this:
Cable
_
ANTENNA
From
_
"
Push on
_
Back
Home
_
L _
_
of
Antenna
_"
TV
VHF or UHF Only
or
Adapter
VHF/UHF Combination
(supplied)
C
-OR-
If the antenna cables coming from your home antenna(s) are a 75-ohm round coaxial cable that carries VHF (channels 2-13)
and a 300-ohm flat twin-lead cable for UHF (channels 14-69), connect them to your set like this:
Cables
UHF
_______
Push on
From
'1'
__
___.
"_
_i
ANTENNA
Home
---!_-
and
Back
Antenna(s)
....
of
VHF
-- --
TV
Transformer**
Antenna Mixer*
(such as #AH011)
(use only #193984)
Note: Be sure to connect the UHF antenna cable to
the UHF, screws on the Antenna Mixer and the VHF
antenna cable to the screws marked VHF.
-OR-
D
If the antenna wires coming from your home antenna(s) are two 300-ohm fiat twin-lead cables as shown here, connect them
to your set like this:
Push on
Home
_
and
" •
_ ....
Antenna Mixer*
(use only #193984)
Note: Be sure to connect the UHF antenna cable to the UHF screws on the Antenna
Mixer and the VHF antenna cable to the screws marked VHF.
ANTENNA
Back
of
TV
* _
Optional
accessory
available
from your dealer.
Only use Antenna
Mixer (Stock #193984).
17