Advertisement
Available languages
Available languages
Blades move
momentarily
after the
dtrigger is
Allow blades to stop
before removing
them from the cut.
A
81WARNING:
inspect the area before
starting
the unit. Remove
all debris and hard
objects
such as rocks,
glass, wire, etc. that
can ricochet,
be thrown,
or otherwise
cause
injury or damage
during
operation,
• Do
not use a cutting
blade that
is bent,
warped, cracked,
broken or damaged in any
other way.
Have worn or damaged
parts
replaced by an authorized service dealer.
• Always
keep
unit
in front of your
body.
Keep all parts of your body away from the
cutting blade,
• Keep the cutting
blade and air vents clear of
debris.
POLE
PRUNER
SAFETY
WARNING:
The reciprocating
blade/
rotating
chain
can cause
severe
injury, In-
spect the unit before use, Do not operate unit
with a bent, cracked or dull Made or dull chain.
Keep away from the blade/chain.
41 WARNING:
The reciprocating
blade/
rotating chain is sharp.
Do not touch.
To pre-
vent serious
injury, always
stop engine
and
ensure blade/chah_
has stopped
moving, dis-
connect
spark
plug, and wear gloves when
changing
or handling
the blade or chain.
WARNING:
A coasting
blade/rotat-
ing chah_ can cause injury while it continues
to
move
after the engine
is stopped.
Maintain
proper control of the unit until the blade/chain
has
completely
stopped
moving.
Keep
hands,
face and feet at a distance
from ail
movh_g parts,
Do not attempt to touch or stop
the blade or chain when it is movh_g,
,="=WARNING:
Falling objects can
cause severe head injury, Wear head protec-
tion when operating this unit with a pole prun-
er attachment.
z't
_t_ WARNING:
Toprevent
s erious
injury,
do not use more than one boom extension with
a pole pruner attachment.
_;_,WARNING:
Keep the pruner away
from power fines or electrical wires,
• Only use for pruning limbs or branches
up
to 4 inches
(10 cm) in diameter,
• Do
not operate
the unit faster
than the
speed needed to prune,
Do not run the unit
at high speed when not pruning,
• Always stop the unit when work is delayed
or when walking from one cutting location to
another,
• if you strike
or become
entangled
with a
foreign object, stop the engine immediately
and check for damage,
Have any damage
repaired
by an authorized
service
deater
before
attempting
further
operations,
Discard
blades
that
are
bent,
warped,
cracked
or broken,
• Stop the unit immediately if you feel excessive
vibration. Vibration is a sign of trouble, Inspect
thoroughly
for loose nuts, bolts or damage
before
continuing.
Contact
an
authorized
service dealer for repair or replacement
of
affected parts as necessary,
SNOW
THROWER
SAFETY
AO&WARNING:
Keep hands
and feet
away from the rotor when starting or running
the engine,
Never attempt to clear the rotor
with the engh_e/motor
running,
Stop engine
and disconnect
spark plug before unclogging
snow or debris from discharge
chute or when
adjusting
vanes.
it
[
rmWARNING:
Never
lean over
dis-
charge
chute,
Rocks
or debris
could
be
thrown into the eyes and face and cause seri-
ous injury or biindness.
_g_,WARNING:
inspect
the area where
the unit is to be used.
Remove
objects
that
could be thrown
or damage
the unit.
Some
objects
may be hidden by fallen snow - be
alert for the possibility.
14
Advertisement
