Rear Panel Facilities; Ac Outlet; Switches 100 W Max - Pioneer SX-303R Operating Instructions Manual

REAR PANEL FACILITIES
• The illustration shows SX-303R multi-voltage model.
®®® ®
1_ FM/AM ANTENNA terminals
Use these antenna terminals for receiving FM and AM broad-
casts.
INPUT jacks
PHONO ......... Connect to the output cables from a turntable.
CD ...... Connect to the output jacks of a compact disc player.
LD ... Connect to the output jacks of an LD player or another unit.
GND terminal
Connect to the ground lead of a turntable.
Use a screwdriver to connect with the ground terminal.
(_ TAPE 1/VCR jacks
Connect these jacks to the cassette deck or video cassette recorder.
(_ TAPE 2/MONITOR jacks
Connect these jacks to the cassette deck.
6_ CONTROL OUT jacks (SX-303R, SX-253R only)
Connect this jack to other Pioneer components bearing the []
mark when using the remote control of this unit to control the
other components.
_m eiver
ore control
unit.
To the CONTROL
---c_:_.- IN jack of other
component.
Pioneer component
bearing the _ mark.
SPEAKERS terminals
A: Connect to a first set speakers.
B: Connect to a second set of speakers.
NOTE:
No sound will be heard through the speakers when both A and B
buttons are depressed if only one set of speakers has been con-
nected to either A or B SPEAKERS terminals.
®
@
8_ VOLTAGE SELECTORS (See page 1)
(multi-voltage models only)
CHANNEL STEP switch (See page 2)
(Multi voltage models only)
1_ AC INLET
Connect the power cord first to the unit, then plug it into the AC
wall outlet.
AC OUTLET
SX-303R: U.S. and Canadian models have 2 AC outlets.)
AC OUTLET
SWITCHED 100 W MAX
Power supplied through this outlet is turned on and off by the
receiver's POWER switch. Electrical power consumption of
the connected equipment should not exceed 100 W (0.8 A
MAX).
The equipment should be disconnected by removing the
mains plug from the wall socket when not in regular use, e.g.
when on vacation.
[U.S. and Canadian models only]
UNSWITCHED 100 W MAX (0.8A MAX)
Power flows continually to this outlet, regardless of whether
the receiver's POWER switch is ON or OFF. Electrical power
consumption of the connected equipment should not exceed
1OO W (0.8A MAX).
The equipment should be disconnected by removing the
mains plug from the wall socket when not in regular use, e.g.
when on vacation.
CAUTION: I
DO NOT CONNECT MONITOR OR TV SET.
NOTE:
Do not connect appliances with high power consumption
such as heaters, irons, or television sets to the AC OUTLET,
in order to avoid overheating or fire risk.
This can cause the receiver to malfunction.
5
<ARB1470>