Rear Panel Facilities - Pioneer SX-311R Operating Instructions Manual

REAR PANEL FACILITIES
¢ The illustration shows SX-311R multi-voltage model.
®
2) ©)
(1) CHANNEL STEP switch (See page 2)
2) FM/AM ANTENNA terminals
Use these antenna terminals for receiving FM and AM broad-
casts,
(3) INPUT jacks
PHONO ve Connect to the output cables from a turntable.
CO Connect to the output jacks of a compact disc player.
VCR/LO - Connect to the output jacks of a video cassette record-
er or LD player, etc,
4 TAPE 1/DAT jacks
Connect these jacks to the cassette deck or digital audio tape
deck.
(5) TAPE 2 jacks
Connect these jacks to the cassette deck.
6) CONTROL OUT jacks
{SX-311R, SX-251R only)
Connect this jack to other Pioneer components bearing the
mark when using the remote control of this unit to control the
other components.
rooney,
=
Oj eS
Vv ;
Pioneer component
bearing the qj] mark.
To the CONTROL
=< IN jack of other
component.
Remote control
carat
(7) SPEAKERS terminals
A; Connect to a first set speakers.
B: Connect to a second set of speakers.
NOTE;
No sound will be heard through the speakers when both A and B
buttons are depressed if only one set of speakers has been con-
nacted to either A or B SPEAKERS terminals.
® ®O®
5
®
(8) GND terminal
Connect to the ground lead of a turntable,
Use a screwdriver to connect with the ground terminal,
@ VOLTAGE SELECTORS (See page 1)
(SX-311R, SX-201 multi-voltage models only}
(® Power cord
Connect to AC wall socket.
@ AC OUTLET
AC OUTLET
[U.S. and Canadian models]
SWITCHED 100 W MAX (0.8 A MAX)
Power supplied through this outlet is turned on and off by the
receiver's POWER switch. Electrical power consumption of
the connected equipment should not excead 100 W (0.8 A
MAX).
The equipment should be disconnected by removing the
mains plug from the wall socket when not in regular use, e.g.
when on vacation.
[Multi-voltage model]
SWITCHED 100 W MAX
Power supplied through this outlet is turned on and off by the j
receiver's POWER switch. Electrical power consumption of
the connected equipment should not exceed 100 W. The eq-
uipment should be disconnected by removing the mains plug
from the wail socket when not in regular use, e.g. when on va-
cation. |
CAUTION:
Q io)
| 2
9
3
io)
$
Pd
m
9
4 =
is)
<=
3
=z
9
3 4
<
a mr
a
NOTE:
Do net connect appliances with high power consumption
such as heaters, irons, or television sets to the AC OUTLET,
in order to avoid overheating or fire risk.
This can cause the receiver to malfunction
<ARB1357>