Back Panel
Auo_ v,oEo OA_TI
R-OOT L
CH.31CH.4 Switch
Selects the channel to which you will tune
the TV to see the VCR picture if you connect the VCR using
one of the basic hookups (Does not apply if you use the A/V hook
ups to connect the VCR to the TV).
AUDIO (R and L) and VIDEO OUT Jacks Sends signals
from VCR to another component, like a TV or VCR, when
connected
by these jacks with A/V cables.
ANT IN Jack Receives a signal from an antenna or cable
system when attached.
RF OUT Jack Passes the VCR's signal to %/using
the coaxial
cable supplied.
40