With A Cable Box - RCA M29400 User Manual

Using Your TV and Remote
With a Cable Box:. Setting the Cable Channel
The Cable Channel works with SAT-CABLE on the remote.
If the Cable
Channel is set, pressing SAT.CABLE selects the channel to see cable
channels. The Cable Channel setting depends on w_ch channel your
cable box must be on to see cable channels. The channels usually used
are 02, 03, 04, 05 or 06..Consult your cable company for more information.
1. Select the Setup menu
13
Controls Alarm Ad
A. Press "IV to set the remote to
control the TV.
B. Press MENU-PROG to select the
Setup menu. This menu is
white.
2. Highlight Cable Channel
Controls Alarm Ad
13
A. Press MOVE V (down) to move
down the menu until Cable
Channel is highlighted.
B. Press _ to underline the
cham_el.
3.
Enter channel number
Controls Alarm Ad
13
A. Enter the number for your cable
box, either 02,03,04,05 or 06.
Press CHANNEL down until
"Disabled" is displayed to turn
this feature off.
13