Other Functions; Checking The Current Auto Off Timer Setting; To Turn Off The Auto Off Timer; Other Indications - Mitsubishi Mr.Slim SEZ-KD09 Operation Manual

/.I%
6. Timer
<Checking the Current Auto Off Timer Setting>
1. Be sure that the "Auto Off" is visible on the screen (at m).
2. Hold down the Timer Menu button @ for 3 seconds, so that "Monitor" is
indicated on the screen (at [_).
• The timer remaining to shutdown appears at [_.
3. To close the monitor and return to the standard control screen, press the
Mode (Return) button (_.
<To Turn Off the Auto Off Timer...>
• Hold down the Timer On/Off button O for 3 seconds, so that "Timer Off"
appears (at [_) and the timer value (at D) disappears.
• Alternatively, turn off the air conditioner itself. The timer value (at D) will
disappear from the screen.
<To Turn On the Auto Off Timer...>
• Hold down the Timer On/Off button O for 3 seconds. The "Timer Off"
indication disappears (at [_), and the timer setting comes on the display
(at D).
• Alternatively, turn on the air conditioner. The timer value will appear at [_.
7. Other Functions
7.1. Locking the Remote Controller Buttons (Operation
function limit controller)
• If you wish, you can lock the remote controller buttons. You can use the
Function Selection of remote controller to select which type of lock to use.
(For information about selecting the lock type, see section 8, item [4]-2
(1)).
Specifically, you can use either of the following two lock types.
(_Lock All Buttons:
Locks all of the buttons on the remote controller.
QLock All Except ON/OFF:
Locks all buttons other than the ON/OFF button.
Note:
The "Locked" indicator appears on the screen to indicate that buttons are cur-
rently locked.
TEMP. _ ON/OFF
\ t.................... s
]'_0©6:_1 €MENU CON/OFF _lll 6 - r ' . FILTER []
[]
Lock Indicator
O
®
<How to Lock the Buttons>
1. While holding down the Filter button (_, press and hold down the ON/OFF
button (_ for 2 seconds. The "Locked" indication appears on the screen
(at m), indicating that the lock is now engaged.
* If locking has been disabled in Function Selection of remote controller,
the screen will display the "Not Available" message when you press the
buttons as described above.
• If you press a locked button, the "Locked" indication (at m) will blink
on the display.
<How to Unlock the Buttons>
1. While holding down the Filter button (_, press and hold down the ON/OFF
button (_ for 2 seconds--so that the "Locked" indication disappears from
the screen (at m).
7.2. Other indications
7.2.1. Centrally Controlled
MITSUBISHIELECTRIC
! !
• Displayed when operation is controlled by central controller, etc.
Restricted operations are shown below.
ON/OFF (including timer operation)
Operation mode
Set temperature
Note:
May also be individually restricted.
7.2.2. Flashing Mode Indicator
,1, ,OF
• When flashes continuously
Displayed when another indoor unit connected to the outdoor unit is
already operating in a different operation mode.
Match with the operation mode of the other indoor unit.
• When mode switched after display flashes
Displayed when operation mode is restricted for each season by central
controller, etc.
Use another operation mode.
9
KB79K741H01 en.pm6
08.10.1,3:36 PM