Extron electronics MVX VGA A User Manual page 47

Operation, cont'd
3.
Figure 3-40 — Select the preset
4.
Figure 3-41 — Press the Enter button
3-24 MVX VGA A Matrix Switchers • Operation
Press and release the Output 1 button (figure 3-40).
Press and release the Output 1 button.
The LED blinks to indicate that this preset
number is selected but not recalled.
1 2 3 4
1 2 3 4
Preset 13 Preset 14 Preset 15 Preset 16
= Blinking LED
Press and release the Enter button (figure 3-41). The configuration stored in
memory location 13 (MVX 128 VGA A) or location 17 (MVX 1212 VGA A,
MVX 168 VGA A, MVX 1616 VGA A) is now the current configuration and can
be viewed in the View-only mode (see example 4, earlier in this chapter).
Press the Enter button to
recall the preset.
CONTROL
ENTER PRESET VIEW ESC
All input LEDs
return to the
The Enter and Preset LEDs
unlit state.
return to the unlit state.
CONTROL
ENTER PRESET VIEW
The Enter LED blinks to indicate
the need to recall the preset.
The Preset LED remains lit.