Mitsubishi Electric DLP C9 Series Owner's Manual page 66

66 Appendices
Many new HDMI devices have a feature called Con-
sumer Electronics Control (CEC) or HDMI Control.
HDMI Control allows one device, such as the TV, to
control other devices, such as an A/V receiver or disc
player. Use of CEC is optional.
Each manufacturer chooses which CEC functions to
support so it is difficult to predict which devices and
features are compatible with Mitsubishi's HDMI Control.
You may find that CEC functions for a specific device are
limited.
4, If prompted for a name,
highlight the name you want
to assign the device.
Highlight On.
Z Highlight EXIT and press ENTER to close the New
Device Found screen.
Note: At any time after completing Auto Input Sens-
ing, you can set the TV's HDMI control on or off
in the Inputs > HDM! Control menu.
Enabling HDMI Control of CEC Devices
To ensure proper detection
• Power on HDMI devices before connecting them to
the TV.
Connect and set up HDMI devices one at a time.
1, Power on the device and allow it to complete the
power-on sequence (boot up). Stop any playback.
Connect the device to one of the TV's HDMI inputs.
3, When the TV detects the connection, the New
Device Found screen will appear.
Note: See "If the New Device Found Screen Displays
No HDMI Control Option" on this page if there is
no HDMI Control option.
New Device Found screen with HDMI Control option,
This screen displays only if the device's HDMI Control is
enabled.