Advertisement
I
_ooC_nput
nnectorj/
Power Indicator
Lamp
_c output_
_
_ __
_onnectorJ
[]
1
Connect the DC Output on the AC
Adaptor to the DC Input on the
Palmcorder with the DC Power Cable
(supplied).
2
Plug in the AC Adaptor.
• The Power indicator will light up.
BATTERY
REFRESH
POWER
CHARGE
Note:
AC Adaptor does not function while
charging the Battery.
DC Input "_
onnecto_)
Cigarette Lighter_
ocket (12V)
.i/
2
Ciigarette
ghter Plug
]
Connect a PV-C16 Car Battery Cord to
the DC Input of the Palmcorder.
2
Start your car engine and then insert the
Car Battery Cord plug into your
cigarette lighter socket.
• There is a fuse located in the lighter plug
end of the cord.
Should fuse replacement be necessary
use the exact current rating (in amps).
Note:
This cord can only be used in vehicles
equipped with DO 12V (negative ground)
batteries.
Use only the specified car battery cord.
9
Advertisement
