Advertisement
ii
_OWER
Switch_
,3
POWER
OFF
VCR
CAMERA
If you stop recording but plan to resume
within 24 hours, use the Edit Standby
feature to make a smooth transition
between scenes.
Set the POWER switch to OFF while in
Record/Pause mode and leave the
cassette in the Palmcorder.
Set the POWER switch to CAMERA and
press RECORD/PAUSE (within 24 hours
to continue recording.
Note:
• If it is longer than 24 hours before you
resume recording, use the manual Easy
Edit feature described below.
• To extend battery life, remove battery from
Palmcorder when not in use.
For proper continuity when taping from the
Stop mode, or after charging the Battery
Pack.
POWER
OFF
1
VCR
CAMERA
Set the POWER switch to VCR.
2_
to go
a
Press REWIND
back
few seconds on the tape.
Z_
Then, press PLAY to review
the picture on the Viewfinder.
Now, press STILL at the
location you wish to continue
your recording.
POWER
OFF
3
VCR
CAMERA
Set the POWER switch to CAMERA.
Your Palmcorder will go into the Record/
Pause mode.
Press RECORD/PAUSE to continue
recording.
17
Advertisement
