Advertisement
The date and time is calculated, including leap
year, up to Dec. 31, 2089. This function
operates on a miniature battery (supplied).
1
2
Un
i
How to remove the Battery.
®
_{_)
O Bend the lock tab outward.
Q Remove the battery.
REPLACE BATTERY WITH PANASONIC
PART NO.
VSBW0004
(CR2025) ONLY. USE OF ANOTHER
BATTERY MAY PRESENT A RISK OF FIRE OR
EXPLOSION.
CAUTION-BATTERY
MAY EXPLODE IF
MISTREATED.
DISPOSE OF USED BATTERY
PROMPTLY.
KEEP AWAY FROM CHILDREN.
DO NOT RECHARGE,
DISASSEMBLE
OR DISPOSE
OF IN FIRE.
12
CLOCK
2,4
1
While pinching the stopper tabs, pull the
tray out of the Battery Compartment.
2
Insert the battery (supplied) into the
Battery tray with the _) mark facing down
until it snaps into place.
• Do not reverse the polarity.
3
Replace the Battery tray so that the small
triangle marks meet.
Note:
i
ake sure your Palmcorder is off when
replacing the battery.
Keep the Battery out of the reach of
children since swallowing it may be
harmful.
i
hen the Battery is installed improperly,
is discharged, or missing, the words
"CLOCK BATTERY" appears on the EVF.
Battery life is approximately 5 years.
Connect the Palmcorder to a power source.
ROWER
'_R
CAMERA
Set the POWER switch to VCR or
CAMERA.
sssE.,ect,
tosta I
the first portion flashing, l,,
.,
3
Press SET repeatedly
(or hold down)
to enter the desired numbers.
Then, press SEL(ect) to fix that portion
and move to the next.
Repeat until the hour, minute, month,
day and year have been entered.
Press SEL(ect) again to lock in
all the settings and start the clock.
Press DISPLAY twice to
O,SPLAV
remove display from EVF.
(_
Note:
_J
Whenever "12:00AM JAN. 1 1994" appears,
it indicates that the clock needs adjustment.
Advertisement
