Zenith P42W34P Installation And Operating Manual page 15

Operation
Turning on the Monitor
1_ Conn_ power cord corr_ly.
2, Press the (D ON/OFF button on the Monitor, At this moment, the Monitor is switched to standby
mode Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT,
MULTIMEDIA button on the remote con_ro_ to switch the Monitor on
1. If the Monitor was turned off with the (D ON/OFF button on the Monitor
* Press the (DON/OFF button on the Monitor to turn the Monitor on,
2, If the Monitor was turned off with the remote control and the (DONiO_ button on the Monitor
. Press the (DON/OFF b_ton on the Monitor and then press time INPUT SELECT button on the
Monitor, Or on the remote control, press POWER, INPUT SELECT or MULTIMEDIA to turn the
Monitor
on.
Language Selection
- The menus can be shown on the screen in the selected ianguage. First _Ject your language_
1, Press the MENU button and then use ,I, / V button to select the SP]E;CL_r- menu,
2. Press the I_ button ar_J then use A / V buttonto select Language.
3, Press the I_ button and then use A / V button to select your desired _anguage.
From this point on, the on-screen menus will be shown in the language of your
choice.
4, Press the ENTER button to save,
Owner _ Manual 15