Zenith P42W34P Installation And Operating Manual page 10

In
s talla tie n
Installation Instructions continued
For proper ve_ilation, allow a clearance of 4" on each
side and the top, 2,36" on the bottom, and 2 _'from the
wa_L Detai_ed instalEation instructions are included in the
optiona_ Desktop Stand lnstaH_ion and Setup Gui_, see
your deaJer
Detailed inst_lation instructions are included inthe
optiona_ Vertica_ VVatl Mounting Bracket Installation and
Setup Gui_ see your dealer,
NOTE; When installing the monitor ver_icaJly, the front
p_el controls must be in the left si_ position,
When installing the monitor vertically you
have to change the OSD (On Screen Display)
display mode so that the menus will _
correctly _d aJso to protect the monitor from
overheating (Refer to P. 20).
10 P_sma D_p_y