Warnings - Zenith P42W22 Owner's Manual

Plasma display panel
Hide thumbs Also See for P42W22:
Table of Contents

Advertisement

WARNINGS
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE
PARTS INSIDE.
REFER TO QUALIFIED
SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying
the appliance.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION:
Do not attempt to modify this product in any way without written authorization from Zenith Etectromcs
Corporation. Unauthorized modification couldvoid the user'sauthority to operate this product.
COMPLIANCE:
The responsibte party for this product's com_tiance is:
Zenith Etectronics Corporation
2000 Ni[tbrook Drive
Uncotnshire. I[ 60069. USA
Phone: 1-847-941-8000
FCC NOTICE
• P42W22
: A Class
A digital
device
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to
Part 15 of tile FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated
in a commercial
environment.
This equipment generates,
uses.
and can radiate radio frequency energy and, if not installed and used in accordance with the instruction man-
ual. may cause harmful interference to radio communications.
Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
• P42W22B,
P42W22H
: A Class B digital device
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful
interference
in a residential instal ation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to
radio communications.
However. there is no guarantee that interference will not occur in a particular instal-
lation. If this equipment does cause harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on. the user is encouraged to try to correct the interference by one
or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced
radio/TV technician
for help.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

P42w22hP42w22b

Table of Contents