Zenith P42W22 Owner's Manual page 28

Picture In Picture (PIP) function
Selecting sound source with PIP on
To hear main source or PIP (inset) sound source.
This function only works with the following resolutions;
640x480, 800x600, 1024x768 (only in Vertical frequency 60 Hz).
To use this function, connect PC/DTV video output to RGB-PC INPUT/RGB-DTV INPUT and connect PC/DTV
audio output to AUDIO INPUT on the monitor.
Press the menu button and then use the up/down button to
select the SPECIAL menu.
Press the vol ( I_ ) button.
menu
@
J
Use the u p/down buttons to select PIP and
then press the vol ( I_ ) button.
SPECIAL
i Use the up/down button to select SOUND
SELECT and then press the vol ( I_ ) button.
PIP •
INPUT •
SOUNDSELECT • SOUND[M1
PosmoN • SOUND IS]
Use the up/down buttons to select main
picture sound (SOUND [M]) or PIP picture
sound (SO_ [S]) and then press the enter
button.
• Each time you press the up/down button, you
toggle between SOUND [M] or SOUND [S].
28