Panasonic TC-P42S1 Operating Instructions Manual page 17

32
VIERA Link TM
"HDAVI
Control TM''*
(Continued)
• Press to exit from
a menu screen
EXIT
• Press to return
to the previous
screen
RETURN
@
Display menu
MENU
Select "Setup"
Select "VIERA Link settings"
Select "VIERA Link"
Select "On"
(default is On)
Select settings
Defaultspeakers
Set
Default speakers
At the start of the DIGA, Player theater, or RAM theater playback, the TV's input automatically switches to the input
based on the playback equipment.
® For the RAM theater, the speakers automatically switch to the theater system.
If using the DIGA operation, the TV's input automatically switches to the DIGA and DIGA menu is displayed.
When "Yes" is selected (p. 29), TV is turned on automatically and switches to the appropriate HDMI input whenever
VlERA Link compatible equipment is initially turned on and Play mode is selected.
When "Yes" is selected (p. 29) and the TV is turned off, all connected VIERA Link compatible equipment is also
automatically turned off.
® DIGA (Panasonic DVD Recorder) will not turn off if it is still in rec mode.
Caution: The TV remains on even if the VlERA Link compatible equipment is turned off.
® Condition
Power off link: Yes, Stand-by power save: Yes
The equipment has "HDAVl Control 4 (with quick start mode)" connected with HDMI cable.
When TV is turned off, all connected VlERA Link compatible equipment is moved to ECO standby mode*
automatically under above conditions.
* Minimum power consumption of standby condition for the equipment.
® Condition
Auto power stand-by: Yes,
The equipment has "HDAVl Control 2 or later" (for available equipment only) connected with HDMI cable.
[ Examples of timing for operation ]
• When the input is switched from HDMI.
• When the "Speaker output" is changed from "Home theater" to "TV".
The connected VlERA Link compatible equipment will be turned off automatically when not in use.
"TV" is the default setting. To set the Home Theater system as default speakers, change the default speakers
setting from "TV" to "Theater". Sound will be output from the Home Theater whenever the TV is powered on.
If the "ONE TOUCH PLAY" key is pressed on the remote control for Panasonic Home Theater system, the following
sequence of operations is performed automatically.
@' Home Theater power switches On, and playback begins.
TV power switches On, and the playback screen is displayed.
_&" A udio is muted on the TV and switches to the theater system.
The following information about the TV settings can be transmitted to each piece of equipment (Recorder/Home
theater/Player) that has "HDAVl Control 3 or later" function connected to a TV with HDMI cable.
Transmittable data Recorder Home theater Player
_1_On Screen Display Language setting
(English/Espafiol/Fran£ais) O O O
(2) Panel Aspect Ratio
(16:9 fixed) O O O
_3) Closed caption information
(Mode/CC type/Digital setting) O ......
_4_Channel information
(Input signal/Channel listtCaption information) O ......
® There is a possibility that all the GUI language information might be set from equipment that has HDMI CEC
function connected to TV with HDMI cable. Depending on operating conditions or the specification for each piece
of equipment the setting may or may not be applied.
® For more details on the external equipment's operation, please refer to the operating manuals for the equipment.
[For Recorder]
® You cannot operate other functions while transmitting TV's information above except Power On/Off key operation.
When you turn off this unit, the transmission will be interrupted (only when you are transmitting _4_ Channel information).
Minimizes lip-sync delays between the picture and audio when you connect to a Panasonic theater system or
Amplifier.
@
<
m
;u
3>
F-
5"
-4
E3
<>
©
o
8
m
-4
33