Panasonic SC-HT733 Operating Instructions Manual page 29

I hanging the remote control code I
This remote control can also operate some other brands of
televisions and video cassette recorders. Change the code to
operate such equipment (-_ below).
Aim the remote control at the equipment.
While pressing [TV] or [VCR]
Press a numbered button to enter the first
digit, and then the second digit.
The remote control outputs the on/off signal. If the code is correct,
the equipment turns on or off. If it doesn't, try entering another code.
Reenter the codes after you change the batteries.
I Recording to the tape deck
7 Press [DVD/CD] to select "DVD/CD".
or
Press [TUNER/BAND] to select "FM" or
"AM".
2 Start recording and play.
I Listening tothe tape deck I
Press [AUX] to select "AUX" as the source.
f
Television code list
Panasonic: 01,02, 26
Sony: 04
Fisher: 14
G-E: 02, 03, 07, 09
Gold Star: 07, 15
Hitachi: 05, 07
JVC: 12
LXI: 03, 06, 07, 10, 14,
15
Magnavox: 06, 07, 11, 15, 22
Mitsubishi: 07, 15, 16, 21
NEC: 07, 15
Video cassette recorder
Panasonic: 01,02, 09, 33
Sony: 05, 06, 07, 35, 36,
37
Fisher: 13, 14, 15, 18, 34
Funai: 08, 30
G-E: 02, 03, 11
Gold Star: 27
Hitachi: 09, 10, 11
JVC: 19, 25, 31,38, 39,
4O
LXI: 10, 13, 14, 15, 18,
27, 30
Magnavox: 02, 09, 12
Mitsubishi: 21,22, 28, 29
Philco:
Philips:
Pioneer:
Quasar:
RCA:
Sanyo:
Sharp:
Sylvania:
Symphonic:
Toshiba:
Zenith:
code list
NEC:
Philco:
Philips:
Pioneer:
Quasar:
RCA:
Sanyo:
Sharp:
Shintom:
Sylvania:
Symphonic:
Toshiba:
Zenith:
06, 07
06
02, 10, 19
02
03, 07, 09, 13, 23,
24, 25
14
08, 21
06, 07, 15
17
10, 21
18, 20
19, 25, 31,38
02, 09, 12, 30
02, 09, 12
09
01,02, 09, 33
02, 03, 04, 09, 10,
11, 12, 23, 24, 26
14, 18, 34
16, 17
32
02, 09, 12, 30
30
23, 24
2O
J
• Attaching to a wall
You can attach all of the speakers to a wall.
_]_ Drive a screw (not included) into the wall.
O Fit the speaker securely onto the screw(s) with the hole(s).
z/,"/, 30-35 nlm
;:_,::/:_[ 4.0_7.0 mm
p!illar (5/32-9/32
)
Wall
or
• The wall or pillar on which the speakers are to be attached should
be capable of supporting 10 kg (22 Ibs) per screw. Consult a
qualified building contractor when attaching the speakers to a wall.
Improper attachment may result in damage to the wall and
speakers.
• Use of optional speaker cables is recommended for wall-mounted
front speakers. (You can also remove the speaker cables from the
pipes supplied with this system).
• [HT930
When mounting the front speakers to a wall, we
recommend using a string (not included) to prevent it from falling
(-_ page 5).
e.g.
Surround speaker _ Front speaker
Center speaker
180 mm
(73/32" )
$
(67/8 LJ
In this position, the
speaker will likely
fall if moved to the
left or right.
Move the speaker
so that the screw is
in this position.
• Fitting speaker stands (notincluded)
(Except Front speakers)
Ensure the stands meet these conditions before purchasing them.
Note the diameter and length of the screws and the distance
between screws as shown in the diagram.
• The stands must be able to support over 10 kg (22 Ibs).
• The stands must be stable even if the speakers are in a high
position.
e,g,
Surround speaker
5 mm (3/ld'),
pitch 0.8 mm (1/32")
60 mm (23/{ ')
Attach the stands to
these metal screw holes.
Speaker stand
(not included)
Plate thickness plus 7 mm to
10 mm (plus %£' to W32")
.£-
o
8-
u)
o
RQT7972