Vcr Setup - LG 22LG3DCH Owner's Manual

EXTERNALEQUIPMENT SETUP
VCR SETUP
_ To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
_ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the
screen. This phenomenon is common to all TVs and is not covered by warranty.
x
r_l
_o
z
r_l
X:)
c
"0
r_l
z
r_l
c
"0
Antenna Connection
1. How to connect
O Connect the RF antenna out socket of the
VCR to the ANTENNA IN socket on the
TV.
Connect the antenna cable to the RF
antenna in socket of the VCR.
2. How to use
_ Set VCR output switch to 3 or 4 and then
tune TV to the same channel number.
_ Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
Wall Jack
26