Preparation
The AC Adaptor (optional)
can only be used with the designated
Panasonic DC
Coupler (optional). The AC Adaptor (optional) cannot be used by itself.
O Open the card/battery
door.
O Insert the DC Coupler, being careful of the
direction.
Open the DC Coupler cover @.
• Push open the Coupler cover from the interior.
O Close the card/battery
door.
• Ensure that the card/battery door is closed.
Q Plug the AC Adaptor into an electrical outlet.
O Connect the AC Adaptor (D to the [DC IN] socket
© of the DC Coupler.
@ Align the marks and insert.
• Ensure that only the AC Adapter and DC Coupler for
this camera are used. Using any other equipment may
cause damage.
• Always
use a genuine
Panasonic
AC Adaptor
(optional).
• When
using an AC Adaptor,
use the AC cable supplied
with the AC Adaptor.
• Some
tripods cannot
be attached
when the DC Coupler
is connected.
• Make sure to unplug the AC Adaptor
when
you open the card/battery
door.
• If the AC Adaptor
and DC Coupler
are not necessary,
then remove
them from the digital
camera.
Also, please
keep the DC Coupler
cover
closed.
• Read the operating
instructions
for the AC Adaptor
and DC Coupler.
-15-