STEP 6: ATTACH THE OVEN TO THE WALL
WARNING
To avoid
risk of personal
injury or property
damage,
use will need two people to
install this microwave
oven.
1. Carefully lift microwave oven and hang it on support tabs
(See Figure 27) at the bottom of the mounting plate.
Reaching through upper cabinet, thread
power supply cord through the power supply cord
hole in the bottom of the upper cabinet.
See Figure 31.
2. Rotate the microwave oven upward so the top of
oven is against the bottom of the upper cabinet or
cabinet frame.
3. Then insert a bolt down through each hole in the
upper cabinet bottom. See Figure 32.
Tighten the bolts until the gap between the upper cabinet
and microwave oven is closed.
4. If wall vented or room vented installation is used,go to
No. 7 on the next page.
power
cord
hole
\
Figure 31
Figure 32
-16-